Medium and High Voltage Electrical Contractors: Switchgear, Transformers and Cable Installed on Your Outage Window

Technician in a yellow hard hat beside a switchgear control cabinet with labeled terminal blocks and neatly bundled wiring to two current sensors

Medium and high voltage · Commercial and industrial

Plants, Campuses And Large Buildings Get Power Systems Planned, Installed and Tested With Safety First

Switchgear, transformers, feeders and testing support for industrial and commercial sites from our hubs in Atlanta, Charleston, Charlotte and Richmond, led by a Master Electrician. Share your voltage level and scope, and we confirm how we support it.

Call 888-586-5554

The short form takes about 60 seconds, and Save your appointment sits one tap away.

Led by a Master ElectricianWBE certifiedLicensed and insured24/7 service requests

Sound familiar?

Imagine Your Power System Installed, Tested and Energized as Planned

You are searching for a medium or high voltage electrical contractor, so safety planning, careful sequencing and clear records matter more than anything on a brochure.

A new transformer or switchgear lineup is on order, and the installation plan is still open.

The power system needs work, and the outage window is short.

Your site needs a contractor who understands higher-voltage safety and records the work.

Picture an outage window that follows the plan, equipment that tests clean, and a handoff that gives your team the records.

One accountable team from the first review to energization.

What we do

Walk Through a Power Project From Cable Pull to Energization

Switchgear, transformers, cable and testing fill the cards below, with studies, safety and records beside them.

Medium voltage electrical contracting

Installation and modification of medium voltage distribution at industrial and commercial sites. Share your voltage level, and we confirm scope.

High voltage electrical work

Planning and coordination for higher-voltage scopes, with your utility and engineer of record.

Switchgear installation & maintenance

Switchgear lineups set, connected, torqued and recorded.

Transformer installation

Pad-mounted and indoor transformers set, connected and tested.

Cable pulling, termination & splicing support

Feeder and power cable routed, terminated and labeled to plan.

Testing & commissioning

Verification and test records before equipment is energized.

Arc flash & coordination study support

Study coordination and labeling that follow your engineer of record.

Substation & yard coordination

Coordination of yard, duct bank and equipment pad work with your civil and utility partners.

Generators & standby power tie-ins

Generator and transfer equipment connected to your distribution.

Metering, relays & controls connections

Protection and control wiring connected to your gear and tested.

Shutdown & outage planning

Switching, lockout and staging planned with your team before work starts.

Troubleshooting & repair

We trace faults to the cause and record what we found.

Also covered

Medium voltage electrical contractorMedium voltage electrical contractorsMedium voltage contractorsMedium voltage installationMedium voltage distribution systemHigh voltage electrical contractorHigh voltage electrical contractorsHigh voltage construction contractorHigh voltage contractorsSwitchgear installationElectrical switchgear installationSwitchgear maintenanceTransformer installationData center electrical contractorMedium voltage electrical contractor Charleston SCPad mounted transformer installationIndoor transformer installationSubstation constructionIndustrial power distributionIndustrial cable trayIndustrial power cableIndustrial groundingElectrical testing and commissioningElectrical testing contractorsArc flash studyShutdown electricalPlant expansion electricalIndustrial electrical contractorsIndustrial electriciansMaster electricianWBE electrical contractorWomen owned electrical contractor

Ready to plan your power project? Send the short form with your voltage level, drawings and outage window, or call.

Call 888-586-5554

Codes & practices

Safety First, Documented Results

AreaHow we work
CodesNEC (NFPA 70), NESC where it applies and your local jurisdiction
SafetyNFPA 70E practices, lockout and tagout, and your site's rules
CoordinationWork planned with your utility, engineer of record and general contractor
RecordsTest records, drawings and a written summary of what we did
LeadershipA Master Electrician leads every scope

Send your one-line diagram or equipment list, and watch the scope take shape.

Who we work with

Operations We Power Alongside

Find your operation below and notice the fit.

Manufacturing & process plants

Distribution upgrades and equipment installs planned around production.

Ports, terminals & logistics

Power for large yards, buildings and equipment.

Warehouses & distribution centers

Service and distribution for new and expanding buildings.

Data centers & large campuses

Power equipment and cable work coordinated with your engineer and your schedule.

Hospitals, schools & institutions

Careful outage planning for spaces that stay in service.

General contractors & engineers

A licensed electrical scope that fits your drawings and schedule.

How we work

Five Steps From First Call to Finished Handoff

Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.

  1. 01
    Call or send the form

    Call 888-586-5554 or send the short form, and add photos, scope and details for your power project.

  2. 02
    Choose your appointment

    Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.

  3. 03
    Receive your report and quote

    Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.

    See an example report →

  4. 04
    Choose your agreement

    Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.

  5. 05
    We deliver and support

    Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.

We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.

Resolve it, then stay with it

Settle the Scope First, Then Choose Your Agreement

Your quoted power project gets resolved first, and the agreements that follow keep one team familiar with your equipment, your one-line diagram and your records.

30 Day Agreement

try a focused scope and feel how we work.

90 Day Agreement

enjoy a full quarter of planned service with room to see results.

Annual Agreement

settle into recurring service and planning with one exclusive team.

Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.

Proof, not promises

Picture the Handoff Your Team Receives

Every power project ends the same way, and the card below shows what lands in your hands.

Every power scope · Atlanta, Charleston, Charlotte and Richmond

A finished project arrives with the equipment connected, the tests recorded and the records handed over.

Before the work
A Master Electrician reviews your request within one business day, and you receive a written report and quote.
During the work
The crew installs, terminates, tests and sequences the work with your utility, engineer and outage window.
At the handoff
You receive test records, labeled equipment and a team available for support.

Look at the switchgear cabinet, the labeled control wiring and the relay panel check.

Technician in a yellow hard hat and lime vest with a laptop beside an open medium voltage switchgear control cabinet under a blue sky
Settings and checks at a medium voltage switchgear cabinet
Technician in a hard hat and reflective vest connecting a laptop to a protective relay on a switchgear door
Protective relay panel connected for settings and checks

Client names stay private by default, and project details are shared with prospective clients on request.

Why ELEKproTEK

Imagine One Team From Review to Energization

Picture a power project that ends with tested equipment, clear records and a team that answers the phone.

  • ELEKproTEK is licensed and insured.
  • Feel the ease of plain explanations and outage work planned around your production schedule.
  • A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.

Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.

She holds the Municipal Association of South Carolina Master Electrician certification.

Where we work

Find Your City and Feel the Local Fit

ELEKproTEK serves medium and high voltage scopes from hubs in Atlanta, Charleston, Charlotte and Richmond, and takes projects beyond them case by case. Share your site address, voltage level and scope, and we confirm how we support it.

Atlanta, GACharleston, SCCharlotte, NCRichmond, VA

Also see: Medium voltage electrical contractor Charleston SCIndustrial electrical contractorsIndustrial electriciansCommercial electrical contractorsIndustrial controls, PLC and SCADAHigh voltage installation in CharlestonCharleston, SC electricians

Questions

Imagine Every Question Answered Before You Call

Each answer below comes from how ELEKproTEK works today.

What does a medium voltage electrical contractor do?

A medium voltage electrical contractor installs and works on the distribution equipment between the utility and your building loads, such as switchgear, transformers and power cable.

Our crews cover installation, termination, testing and records, planned with your engineer and your utility.

What is the difference between medium and high voltage?

The exact ranges depend on the standard and the utility. Share your voltage level and equipment list with the form, and a Master Electrician confirms how we support the scope.

Do you install switchgear and transformers?

Yes. We set, connect and test switchgear and transformers at commercial and industrial sites, following your drawings and engineer of record.

Can you work with our utility and engineer?

Yes. We plan the sequence, outage windows and switching steps with your utility, engineer of record and general contractor before work starts.

Do you provide testing and commissioning?

We support verification and commissioning with recorded results. Share your testing requirements with the form, and we confirm what we perform and what a specialty testing partner covers.

Do you support arc flash and coordination studies?

We coordinate with your engineer of record and apply the labeling and settings their study calls for.

How do you plan outages?

We plan switching, lockout and staging with your team before the first breaker opens, so the work follows the plan.

Where do you work?

We serve our hub regions around Atlanta, Charleston, Charlotte and Richmond, and we take projects beyond them case by case. Send the form with the site address and scope, and we confirm timing with you.

Who leads the work?

A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.

Who is the best medium voltage electrical contractor?

The best fit is a licensed team that plans safety first, coordinates with your utility and engineer, tests thoroughly and documents the finished work.

ELEKproTEK is built around that: a Master Electrician leads every scope, and you receive a written report and test records. Send the short form and compare for yourself.

What happens after I send the form?

You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.

Every step is spelled out, so you always know what comes next.

Does my appointment deposit count toward the project?

Yes. Every service appointment deposit credits toward your project total, and the booking page shows the details for the appointment you choose.

The short form and the phone number sit right below the last answer.

Your first step · about 60 seconds

Your Power Project, Led by a Master Electrician

A Master Electrician reviews your request, and you choose the appointment that suits you.

Call 888-586-5554

We Keep Your World Powered. Call 888-586-5554, or Save your appointment.

P.S. Attach your one-line diagram or equipment list, and choose your time next.