Industrial Controls, PLC Programming & SCADA Services That Make Plant Upgrades Simple

Industrial controls integrator · PLC · HMI · SCADA
PLC, HMI and SCADA, Programmed by the Electricians Who Wire It
Licensed Electrician. PLC Programmer. One Team, from the panel to the PLC to the SCADA screen.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
Sound familiar?
Imagine Controls Running Quietly in the Background
You are looking for an industrial controls integrator, so PLCs, HMIs and SCADA are part of your day.
Program logic that grows in layers over the years waits for the one person who understands it.
Alarms that sound all shift get silenced by operators, and the important ones blend into the noise.
Panels and programs written by different hands meet for the first time at startup.
Picture one team on both sides of the panel, with every terminal landing where the program expects it.
What we do
Feel PLC, HMI and SCADA Work as One System
PLC programming, HMI programming, SCADA programming and control panel building come from the same crew, then commissioning with your operators.
PLC programming & upgrades
New programs, revisions and clean-ups, written so the next person can read them.
Legacy PLC migration
Move aging platforms to current hardware with a cutover plan that respects your production schedule.
HMI development
Operator screens designed around how your people actually run the process.
SCADA implementation & integration
Tank levels, valve positions, trends and alarms in one clear picture.
Control panel design & build
Panels designed, built and labeled so a stranger could trace them.
VFD & motor control
Drives, starters and motor circuits wired and tuned for the load.
Pump & lift station controls
Reliable start, stop, alternation and alarm logic for water and process pumping.
Alarm management, troubleshooting & emergency controls response
Find the cause, fix it, and document what changed.
Motor control centers
MCC design, installation and modernization, with VFD integration and motor protection.
Industrial Ethernet & networking
EtherNet/IP, Profibus, Profinet and Modbus TCP/IP, with network troubleshooting.
Process control & instrumentation
Closed-loop control, PID tuning and instrument integration.
Control system retrofits & modernization
Replace obsolete equipment in steps that keep production running.
Distributed control systems (DCS)
DCS design, implementation and migration.
Safety control systems
Safety PLC programming, interlocks and lockout/tagout integration.
PLC documentation & backups
Program backups, I/O lists and as-builts your team can use.
Remote PLC programming & troubleshooting
Remote support for programming, monitoring and fault finding.
Controls integrator & automation integrator
One control system integrator for plants, warehouses, utilities and critical facilities.
SCADA programming, OPC server & Ignition
SCADA programming and OPC server configuration across Ignition, Wonderware and FactoryTalk View.
Water treatment controls & lift station control panels
Controls and SCADA for water treatment, wastewater and pumping.
PLC repair, maintenance & troubleshooting
Fault finding, preventive maintenance and repair for Allen-Bradley, Siemens and more.
Also covered
Ready to hear your plant run quietly? Send the short form or call, and your next step takes shape.
Call 888-586-5554Platforms & standards
We Work With What You Already Run
| Area | What we work with |
|---|---|
| PLC and DCS platforms | Allen-Bradley (ControlLogix, CompactLogix), Siemens, Schneider, Omron, Mitsubishi, ABB, GE, Honeywell, AutomationDirect |
| SCADA & HMI | FactoryTalk View, Ignition, Wonderware |
| Networks | EtherNet/IP, Profibus, Profinet, Modbus TCP/IP |
| Codes & practices | NEC (NFPA 70), NFPA 70E safety practices, manufacturer requirements, and your site's P&IDs and standards |
Control panels are built to UL 508A industrial control panel practices.
Running something else? Tell us when you reach out and we confirm fit before you commit to anything.
Tell us what you run, and feel the confidence of a fit confirmed before you decide anything.
Industries
Controls for Plants, Utilities and Critical Facilities
Find your facility below and notice how naturally the work fits.
Data centers & mission-critical
Critical power and controls where uptime is the product.
Government & public infrastructure
Federal, state and municipal facilities that need documented, inspectable work.
Water & wastewater
Treatment plants, lift stations and process instrumentation. Our founder programmed PLCs and SCADA for water treatment plants before starting ELEKproTEK.
Manufacturing & process
Motor controls, PLC panels and the instruments that feed them.
Distribution & logistics
Conveyors, sorters and material handling that have to run on the first shift.
Bulk liquid terminals & chemical
Tank farms, transmitters and loops that have to read true.
Utilities & critical facilities
Standby power, switchgear and controls for sites that cannot go dark.
How we work
Five Steps From First Call to Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your controls project.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Receive your report and quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05We deliver and support
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
Start small, stay with it
Choose the Agreement That Fits Your Plant
Imagine your PLCs, HMIs and SCADA on a plan built around your goals, with one team that already knows your site.
30 Day Agreement
try a focused scope and feel how we work.
90 Day Agreement
enjoy a full quarter of planned service with room to see results.
Annual Agreement
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture Your Panel Looking Like This
Scroll the real work below and imagine your own project in these photos.
Controls · Distribution center · Northeast · Subcontractor to an automation integrator
An automation integrator brought ELEKproTEK in to install an inbound sorter at a distribution center on a fixed schedule.
- Challenge
- An automation integrator needed a licensed electrical crew to install an inbound sorter on a fixed schedule.
- What we did
- Field installation of sorter and conveyor controls, device wiring and panel terminations.
- Result
- Installed in three days.
Look closely at the labels, the loops and the clean terminations.




Water & wastewater systems



Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine the Rarest Combination in Industrial Work, Working for You
Picture your next startup with the people who wired it sitting beside the people who programmed it.
- ELEKproTEK is licensed and insured.
- Feel the ease of one accountable contractor from the panel to the PLC to the SCADA screen.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants. She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK keeps hubs in Charleston, Atlanta, Charlotte and Richmond, and the Atlanta office and warehouse keep supplies close. Share your project location and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Choose Your Path
My readings need to be right
Loop checks and calibration, with the findings written down.
Open this path →
My line has to keep moving
Conveyors, sorters and controls that work together.
Open this path →
I have an outage window to hit
Switchgear and new power, planned to the day.
Open this path →
Something keeps stopping my plant
Troubleshooting, motor circuits and power distribution.
Open this path →
I am in the Atlanta area
Commercial and industrial electricians for Atlanta and nearby cities.
Open this path →
I am in the Charleston area
Commercial and industrial electricians for Charleston and nearby cities.
Open this path →
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
Can you work with our existing PLC brand?
Most likely. We work with Allen-Bradley, Siemens, AutomationDirect and Omron. Tell us what you run when you reach out and we confirm fit.
Do you program Allen-Bradley, Rockwell and Siemens PLCs?
Yes. We work with Allen-Bradley (ControlLogix, CompactLogix, MicroLogix), Rockwell software, Siemens (S7 and Step 7), Schneider Modicon, Omron, Mitsubishi, ABB and AutomationDirect. Tell us what you run and we confirm fit.
Do you build UL 508A industrial control panels?
We design and build industrial control panels to UL 508A industrial control panel practices. Share your panel requirements and we confirm what your project needs.
Can you repair, maintain and troubleshoot a PLC?
Yes. We handle PLC repair, preventive maintenance and fault finding, on site or remotely, and we document what changed.
Do you do SCADA programming and OPC server setup?
Yes. We program and integrate SCADA with Ignition, Wonderware (AVEVA InTouch) and FactoryTalk View, and we configure OPC servers such as Kepware and OPC UA.
Do you handle water treatment controls and lift station control panels?
Yes. Naomi Pittman programmed PLCs and SCADA for water treatment plants, and our team builds and programs pump and lift station control panels.
Are you a controls integrator or an electrical contractor?
Both. A Master Electrician leads a team that wires the panel and programs the PLC, HMI and SCADA, so one accountable contractor covers the whole system.
Do you do both the wiring and the programming?
Yes. Our crews install and terminate the panel, and the same team programs and commissions the PLC, HMI and SCADA.
Can you take over a project another contractor started?
Yes. We begin with an assessment of what exists, document it, and give you a clear plan to finish or fix it.
What documentation do we receive?
Program backups, I/O and loop records, as-built drawings and a findings summary, so your team can maintain the system.
How fast can you start, and do you offer emergency service?
Service requests are received around the clock, 7 days a week, by phone at 888-586-5554 and through the form. Service is by appointment. New requests are scheduled within 24 hours of first contact when we have availability, weekends included, and the booking page shows open times and an emergency option. Clients already in our system have even easier access to 24/7 coverage.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options. Every step is spelled out, so you always know what comes next.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
One Licensed Team for Your Whole System
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Send the short form while this page is open, and choose your time next.