Charlotte, NC Commercial & Industrial Electricians Serving Both Carolinas, From Concord to Fort Mill

Charlotte, NC · Concord, Gastonia and Fort Mill · Commercial and industrial electricians
Charlotte Power Handled Across Both Carolinas
Repairs, panels, lighting, generators and controls for Charlotte, Concord, Matthews, Mooresville, Gastonia, Fort Mill and Rock Hill, from crews led by a Master Electrician.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
x
Imagine Your Charlotte Area Sites Humming on Schedule
You are searching for a commercial or industrial electrician in the Charlotte area, so the power in your buildings shapes your whole calendar.
Growth keeps arriving in Charlotte, and each new tenant, line or room needs power on a date.
One site sits in North Carolina, another in South Carolina, and each seems to need its own contact.
A utility room holds panel directories that have drifted from the circuits.
Picture one team that answers for every site, with the write up in your hands.
Work across the Charlotte region
Feel Charlotte Area Electrical Work Done Right
Commercial repairs, industrial power and controls, and standby systems fill the cards below.
Commercial electrical repair & troubleshooting
Find the cause of flickering lights and tripping breakers, then fix what is actually failing.
Panels, transformers & power distribution
Commercial and industrial panels, transformers and distribution sized for your loads, with labeled directories.
Commercial & parking lot lighting
Interior, exterior and parking lot lighting installed, aimed and tested.
Generators, transfer switches & standby power
Generators and automatic transfer switches installed, connected and tested.
EV charger installation
Commercial chargers installed on circuits sized for the load.
Industrial controls, PLC & SCADA
Control panels, PLC, HMI and SCADA work from the crew that wires the panel.
Instrumentation & calibration
Transmitters and loops checked and calibrated, with the results written down.
Emergency electrician service
Call us when the power goes out, and a team member picks up the phone.
Electrical inspection & testing
Walk-through inspections and testing with the findings written up and the fixes scoped.
Panels, switchgear & transformers
Panels, switchgear and transformers for plants, schools and large commercial sites.
Warehouse & distribution electrical
Lighting, power and equipment hookups for Charlotte area warehouses and distribution buildings.
Also covered
Ready to settle the open questions? Send the short form with a photo, or call.
Call 888-586-5554One standard
One Standard for Both Carolinas
| Area | How we work |
|---|---|
| Two states | Projects in North Carolina and South Carolina, from Charlotte to Fort Mill and Rock Hill |
| Codes | NEC (NFPA 70) and the local jurisdiction that holds your project |
| Safety | NFPA 70E practices and your site's rules |
| Records | A written summary of what we found and what we did |
| Leadership | A Master Electrician leads every scope |
Tell us where the site sits, and feel how quickly the picture clears.
Who we work with
Charlotte Area Properties We Serve
Find your property type below and notice the fit.
Property & facility managers
One accountable team for panels, lighting, standby power and repairs across your sites.
Offices, retail & mixed use buildings
Power, panels and lighting planned around your hours.
Data centers & server rooms
Power distribution and standby systems planned around uptime.
Warehouses & distribution
Power, lighting and equipment hookups for busy buildings.
Manufacturing & process plants
Motor circuits, controls and instrumentation that keep lines running.
Schools, healthcare & public facilities
Documented, inspectable work for buildings people depend on.
How we work
Five Steps From First Call to Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your electrical project.
- 02Pick your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Read your report
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05Stay supported
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
From one call to a standing crew
Choose the Agreement That Fits Your Property
Imagine your properties on a plan built around your goals, with one team that already knows your site.
First 30 Days
try a focused scope and feel how we work.
Next 90 Days
enjoy a full quarter of planned service with room to see results.
Full Year Crew
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture a Sorter Installed on a Fixed Schedule
Read the distribution center project story below and picture your building in it.
Controls · Distribution center · Northeast · Subcontractor to an automation integrator
An automation integrator brought ELEKproTEK in to install an inbound sorter at a distribution center on a fixed schedule.
- Challenge
- An automation integrator needed an electrical crew to install an inbound sorter on a fixed schedule.
- What we did
- Field installation of sorter and conveyor controls, device wiring and panel terminations.
- Result
- Installed in three days.
Look at the distribution panels, the meter socket riser, the garage breaker panel, the tool bag and the outlet near the baseboard.




Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine Explained, Fixed and Recorded
Picture a Charlotte area service visit that ends with a clear written summary.
- ELEKproTEK is insured, and a Master Electrician leads every scope.
- Feel the ease of plain explanations and a visit planned around your hours.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK serves the Charlotte area, including Concord, Huntersville, Matthews, Mooresville, Gastonia, Fort Mill and Rock Hill, alongside Atlanta, Charleston and Richmond. Share your project address and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Choose Your Path
My lights flicker and breakers trip
Repairs, panels, lighting and generators.
Open this path →
I am building out a space
New construction, build outs and temporary power.
Open this path →
Something keeps stopping my plant
Troubleshooting, motor circuits and power distribution.
Open this path →
I have an outage window to hit
Switchgear and new power, planned to the day.
Open this path →
My building should run smarter
Lighting controls, energy monitoring and EV charging.
Open this path →
My plant needs a brain
PLC, HMI and SCADA from the team that wires the panel.
Open this path →
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
Do you serve Concord, Gastonia, Fort Mill and Rock Hill as well as Charlotte?
Yes. We serve projects in Charlotte, Concord, Huntersville, Matthews, Mooresville, Gastonia, Fort Mill and Rock Hill. Send the form with the address and the scope, and we confirm timing with you.
Do you work in both North Carolina and South Carolina?
Yes. We work on both sides of the state line. Send the form with the project address, and we confirm how we support it, including the license that applies.
Can you handle a warehouse, restaurant or tenant improvement in Charlotte?
Yes. We run the circuits, lighting and equipment power for warehouses, restaurants and tenant improvements, and we plan the work around your opening date and your hours.
Do you offer emergency electrician service in Charlotte?
Call us when the power goes out and we start solving it with you.
How do I choose an electrician in Charlotte for a commercial building?
Ask who finds the cause, who explains the fix and who writes down what changed. That is how our visits end, with a written summary in your hands.
Who leads the work?
A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.
Does my appointment deposit count toward the project?
Yes. Every appointment deposit credits toward your project total, emergency service included.
Your project total is at least the amount of the appointment you booked, and the free virtual quote is a free way to start.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, and we complete the service you approved first.
After that, you can choose a 30-day, 90-day or annual agreement to stay supported. Every step is spelled out, so you always know what comes next.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
Crews Led by a Master Electrician
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Add a photo of the panel label or the trouble spot, and choose your time next.