Commercial Building Automation Services That Make Lighting Controls, Energy Monitoring & Backup Power Simple

Commercial automation · Building controls
Commercial Automation Installed by Electricians Who Understand Controls
Building controls, lighting controls, energy monitoring, EV charging and standby power, wired and commissioned by a team led by a Master Electrician.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
Sound familiar?
Imagine a Building That Runs the Way You Planned
You are researching commercial automation, so tenants, schedules and energy use fill your days.
Lighting, equipment and metering each get a panel, and the panels talk past each other.
Legacy controls keep running, and every change feels risky to the person who owns them.
New loads like EV charging and standby power land on the same building power.
Picture one team planning the power and the controls together.
What we do
Feel Your Building Come Together
Licensed electricians who understand controls install and commission each scope below.
Building automation system installation
Controls panels, wiring and field devices installed for your building automation system, built to your vendor's design.
BMS installation & BACnet integration
Building management system wiring and device checkout, with BACnet integration alongside your controls vendor.
Commercial lighting controls
Lighting control panels, scheduling, dimming and wireless controls wired and checked.
Energy management & monitoring
Power and energy monitoring installed so you can see where the building's power goes.
EV charger installation & load management
Commercial chargers installed with load management planned against available building power.
Generator monitoring & transfer switches
Automatic transfer switches installed and generators tied into remote monitoring.
Legacy controls upgrades
Retrofits planned to limit disruption.
Commissioning & documentation
Checkout, labeling and records delivered at handoff.
Occupancy sensors & daylight harvesting
Occupancy sensors, daylight sensors and photocells installed, aimed and checked so lights follow the space.
Parking lot & exterior lighting controls
Photocells, timers and control panels for parking lots, garages and building exteriors.
LED lighting retrofits with smart controls
Warehouse, office and exterior lighting converted to LED with smart controls.
HVAC & equipment controls wiring
Control wiring and checkout for air handlers, pumps and rooftop units tied into your building controls.
Smart building & IoT sensor integration
Connected sensors and devices tied into your building automation.
PLC programming, HMI & SCADA integration
Facility automation programmed and integrated by the same crew.
Power quality analysis
Power quality analysis and solutions for sensitive equipment.
Also covered
Ready to bring order to your building? Send the short form with a few photos, or call.
Call 888-586-5554Working alongside your vendors
We Fit Into Your Existing Controls Plan
Already have a building automation vendor or a design? We install and commission to your plans and work alongside your vendor.
| Area | Reference |
|---|---|
| Codes | NEC (NFPA 70), NFPA 70E safety practices, and local requirements |
| Controls | PLC-based controls (Allen-Bradley, Siemens, AutomationDirect, Omron) and your vendor's systems |
| Protocols | BACnet and other open building protocols, coordinated with your controls vendor |
Share your vendor and your drawings, and feel the work slot right in.
Who we work with
Commercial Properties We Serve
Find your property type below and notice how the scope fits your day.
Property & facility managers
One accountable team for panels, lighting, standby power and repairs across your properties.
General contractors
Licensed electrical scope, temporary power and coordination for your schedule.
Offices, retail & mixed-use
Work planned around your business hours, with clean handoffs.
Education & public facilities
Documented, inspectable work for schools, colleges and public buildings.
Warehouses & distribution
Power, lighting and equipment hookups for busy buildings.
Data centers & critical facilities
Mission-critical power planning and standby systems.
How we work
Five Steps From First Call to Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your building project.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Receive your report and quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05We deliver and support
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
Start small, stay with it
Choose the Agreement That Fits Your Building
Imagine your building systems on a plan built around your goals, with one team that already knows your site.
30 Day Agreement
try a focused scope and feel how we work.
90 Day Agreement
enjoy a full quarter of planned service with room to see results.
Annual Agreement
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture Your Charging and Controls Documented and Done
Read the field story below and picture your property in it.
EV infrastructure · Federal facilities · Tennessee & Alabama · Subcontractor
ELEKproTEK installed the electrical scope for fleet EV charging at federal facilities in Tennessee and Alabama.
- Scope
- Electrical scope for fleet EV charging at federal facilities.
- What we did
- Installed to the general contractor's plans and supported change-order and coordination needs.
- Result
- Charging infrastructure delivered for the prime contractor.
Look at the drive panel, the energy readout and the lit canopy.




Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine One Team for Power and Controls
Picture a handoff where every panel is labeled and every system is checked.
- ELEKproTEK is licensed and insured.
- Feel the ease of working with one accountable contractor.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK keeps hubs in Charleston, Atlanta, Charlotte and Richmond, and the Atlanta office and warehouse keep supplies close. Share your project location and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Also see: Commercial electrical contractorsCommercial electrician servicesIndustrial controls, PLC & SCADAFactory & warehouse automation
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
What counts as commercial automation?
Controls for building equipment, lighting controls, metering, EV charging, and standby power integration, installed and commissioned by licensed electricians.
Do you work with our existing building automation vendor?
Yes. We install and commission to your design and work alongside your vendor.
Can you plan EV charging against building power?
Yes. We review available capacity and plan charging and any needed upgrades.
Do you provide documentation?
Yes. You receive labeling, checkout results and a summary of what was installed.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.
Every step is spelled out, so you always know what comes next.
What does commercial building automation include?
It covers the power and control wiring behind your building's lighting controls, energy monitoring, equipment controls, EV chargers and standby power. We install the panels, wiring and field devices, then check each one and leave you labeling and records.
Can you install a building management system or tie into BACnet?
We install the power, control wiring, panels and field devices for a building management system and check each point against the design. For BACnet integration we work alongside your controls vendor, who handles the network and software side.
Can you add occupancy sensors, daylight harvesting or photocells to an existing building?
Yes. We wire the sensors and control panels, aim and test them, and set schedules for parking lots, offices and warehouses.
Send a photo of the lighting panel and a note on the spaces, and we scope it from there.
Can you install EV chargers with load management?
Yes. We review your panel and available capacity, then plan the charger count and load management so chargers share the power you have.
Send a photo of the main panel label and the parking layout.
Do you install transfer switches and connect generator monitoring?
Yes. We install automatic transfer switches, connect generators and tie them into remote monitoring so you know when the building is on standby power.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
One Licensed Team for Your Building
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Send photos of the main panel and the equipment with the short form, and choose your time next.