Electrical Engineering Services | Commercial & Industrial

Technician in a cap pointing at a one-line power riser diagram on a large screen.

Electrical engineering · Commercial and industrial

Engineering That Meets the Job Site

One line diagrams, load calculations, controls and commissioning for commercial and industrial projects, from a team led by an electrical engineer who is also a Master Electrician.

Call 888-586-5554

The short form takes about 60 seconds, and Save your appointment sits one tap away, with your appointment deposit credited toward your total.

Engineer and Master Electrician ledWBE certifiedInsured24/7 service requests

Sound familiar?

Imagine the Plan and the Wiring Written by the Same Team

You are searching for electrical engineering services, so the calculations, the drawings and the field work shape your whole project.

The drawings come from one firm and the installation from another, and the details drift apart.

Load calculations wait while a schedule keeps moving.

Changes made in the field stay in the field, and the diagrams fall behind.

Picture an engineer and Master Electrician who plan it, wire it, test it and update the records.

What engineering support looks like

Feel the Ease of Engineering Built for the Field

Diagrams, load calculations, sizing, controls, instrumentation and commissioning fill the cards below.

One line diagrams & power riser review

Review how power flows through your building and write it down clearly.

Load calculations

Measure and calculate what the building draws before you add to it.

Panel, feeder & switchgear sizing

Size panels, feeders and switchgear for today's loads and tomorrow's growth.

Generator & standby power sizing

Match standby power to the loads you want protected.

EV charging load planning

Plan charger counts and load management against available building power.

Controls & PLC engineering

Control logic, PLC, HMI and SCADA from an engineer who understands the wiring.

Instrumentation & loop engineering

Loops, scaling and calibration plans that make the readings trustworthy.

Design coordination with the field

Turn drawings into installable work and field changes into updated records.

Commissioning & test documentation

Test, commission and document the system so the handoff is complete.

Also covered

Electrical engineering servicesElectrical engineering companyElectrical engineering firmElectrical engineering consultingElectrical engineer consultantCommercial electrical engineeringIndustrial electrical engineeringElectrical design servicesElectrical design buildElectrical load calculationLoad calculation servicesOne line diagramPower riser diagramPanel scheduleElectrical system designPower distribution designControls engineering servicesPLC engineering servicesInstrumentation engineeringElectrical commissioning servicesElectrical engineer near meElectrical engineer and master electrician

Ready to talk through your project? Send the short form with your drawings or a photo, or call.

Call 888-586-5554

How we engineer

Calculated, Safe and Documented

Area	How we work
Leadership	An electrical engineer and Master Electrician leads every scope
Codes	NEC (NFPA 70) and your local jurisdiction
Safety	NFPA 70E practices and your site's rules
Calibration	Calibrated with NIST traceable reference equipment
Records	Diagrams, test results and a written summary of the work
Field to design	The people who design the work also install it

Tell us about the project, and feel how quickly the picture clears.

Who we work with

Clients We Serve

Find your role below and notice the fit.

Property & facility managers

One accountable team for panels, lighting, standby power and repairs.

Owners & developers

Electrical scope from the first quote to the finished records.

General contractors

Electrical coordination that keeps your schedule intact.

Manufacturing & warehouses

Motor circuits, controls and power that keep lines running.

Restaurants, retail & offices

Quick answers and clean work around your business hours.

Government, schools & healthcare

Documented, inspectable work for public and medical buildings.

How we work

Five Steps From First Call to Finished Work and Ongoing Support

Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.

01
Share the project
Call 888-586-5554 or send the short form, and add photos, scope and details for your engineering project.
02
Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and every appointment deposit, emergency service included, credits toward your total.
03
Review your quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
See an example report →
04
Deliver the quoted scope
Feel the quoted service come to a close: we deliver the work, commission it, document it and hand you the written summary.
05
Pick your agreement
Choose your agreement to stay supported: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.

We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.

From one study to a standing partner

First Your Quote Is Resolved, Then Choose the Agreement That Fits Your Project

Imagine the work we quoted finished, tested and written down, and then your projects on a plan built around your goals, with one team that already knows your site.

Single Scope

Follow the quoted work with a focused scope and feel how we work.

Phased Plan

Follow the quoted work with a full quarter of planned service and room to see results.

Standing Partner

Follow the quoted work with recurring service and planning from one exclusive team.

Your appointment deposit credits toward your total, so your first step already counts toward the work we quoted. The service we quoted is resolved first, every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.

Proof, not promises

Picture Switchgear Replaced Inside the Window

Read the South Carolina project story below and picture your own project beside it.

Switchgear · South Carolina technical college · Prime contractor on a state project

ELEKproTEK served as prime contractor on a South Carolina technical college project that replaced switchgear and a transformer inside a planned outage window.

Challenge: Aging main and lighting distribution panels and a 500 kVA transformer had to come out within a planned outage window.
What we did: Replaced them with new switchgear and a 300 kVA transformer, coordinating rigging and the outage plan.
Result: New switchgear and transformer in service, with NETA acceptance testing at the finish.

Look at the PLC rack, the large panel, the relay panel and the headlamp inspection with notes, where the engineering meets the field.

Control panel with a PLC rack, power supplies, small breakers, and columns of blue-wired terminal blocks. — Terminal columns, breakers and power supplies wired around a PLC rack.

Technician in a lime shirt seen from behind at a large electrical panel, with a low-voltage wiring rack and conduit runs beside it. — Panel work beside a low-voltage wiring rack.

Control panel interior with a row of PLC modules above rows of relays and labeled terminal blocks. — Labeled wiring and relay rows inside a finished PLC control panel.

Technician with a headlamp writing on a clipboard while looking into a recessed breaker panel beside a water heater. — Findings written down at the panel.

Client names stay private by default, and project details are shared with prospective clients on request.

Why ELEKproTEK

Imagine One Lead From Calculation to Commissioning

Picture a lead who understands the math and the wiring, because that lead does both.

ELEKproTEK is insured, and an electrical engineer who is also a Master Electrician leads every scope.
Feel the ease of written scopes, plain explanations and clean handoffs.
A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.

Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.

She holds the Municipal Association of South Carolina Master Electrician certification.

Questions

Imagine Every Question Answered Before You Call

Each answer below comes from how ELEKproTEK works today.

What do electrical engineering services include?

Typical work includes one line diagram review, load calculations, panel and feeder sizing, standby power and EV charging load planning, controls and instrumentation engineering, and commissioning with test documentation.

What is the difference between an electrical engineer and an electrician?

An engineer plans and calculates how a system should work. An electrician builds, wires and tests it.

At ELEKproTEK the lead is both an electrical engineer and a Master Electrician, so the plan and the field work stay connected.

Do you design and install the work?

Yes. The people who plan the work also install, test and document it, which keeps changes in the field matched to the drawings.

Can you review my existing drawings?

Yes. Send your one line diagrams or panel schedules with the request form, and we review them as part of your quote.

Can you help size a generator or EV chargers?

Yes. We calculate the loads, then recommend generator size or charger count and load management.

Do you provide controls and instrumentation engineering?

Yes. Controls, PLC, SCADA and instrumentation engineering sit beside the electrical scope, from the same team.

Do you provide stamped drawings?

Share the drawing requirements with your request, and we confirm what we can provide for your project.

How fast can you start, and do you offer emergency service?

Service requests are received around the clock, 7 days a week, by phone at 888-586-5554 and through the form. Service is by appointment.

New requests are scheduled within 24 hours of first contact when we have availability, weekends included, and the booking page shows open times and an emergency option. Clients already in our system have even easier access to 24/7 coverage.

Does my appointment deposit count toward the project?

Yes. Every appointment deposit credits toward your project total, emergency service included.

Your project total is at least the amount of the appointment you booked, and the free virtual quote is a free way to start.

What happens after I send the form?

You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, and we complete the service you approved first.

After that, you can choose a 30-day, 90-day or annual agreement to stay supported. Every step is spelled out, so you always know what comes next.

Can you support a project outside your hubs?

Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.

The short form and the phone number sit right below the last answer.

Electrical Engineering Services for Commercial & Industrial Projects: One Line Diagrams, Load Calculations, Controls and Commissioning From an Engineer Who Also Wires the Job