Owners & General Contractors: Meet the Commercial Electrical Contractors for New Construction, Build Outs & Temporary Power

Commercial electrical contractor
Commercial Electrical Contractors Who Plan Around Your Business Hours
New construction, tenant improvements, panels, lighting, generators and temporary power from a team led by a Master Electrician.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
Sound familiar?
Imagine the Crew Arriving Right on Time
You are researching a commercial electrical contractor, so schedules, tenants and turnover are on your mind.
Appointments slip, and the day slips with them.
Scopes shift after the quote, and the reasons arrive late.
Inspectors and the next contractor ask what was done, and the record runs thin.
Picture a project where the quote matches the scope and the records land in your hands.
What we do
Feel Commercial Electrical Work Scoped Clearly
Owners, managers and general contractors use the services in the cards below.
Panel & service upgrades
Capacity upgrades and replacements, planned around your hours.
Power distribution & sub-panels
Feeders, sub-panels and distribution for new and changing loads.
Tenant improvement & new construction electrical
Electrical scope for build-outs and new construction.
Lighting, LED retrofits & parking lot lighting
Fixtures, controls and exterior lighting.
Generators & ATS
Standby power installed, connected and commissioned.
EV charging infrastructure
Charging installed against your building's available power.
Temporary power for construction
Temporary poles, meter bases and grounding for job sites.
Maintenance & repair programs
Planned service that keeps small problems small.
High voltage & switchgear installation
Medium voltage systems, switchgear installation and transformer connections.
Data center electrical power distribution
Redundant power distribution, UPS installations, backup power, PDUs and electrical busways.
Panels, motor control centers & switchgear
Main distribution panels, sub-panels, MCCs and switchgear, with load analysis, arc flash studies and code compliance upgrades.
Infrastructure upgrades & retrofitting
Modernization of aging systems, energy efficient retrofits and fleet electrification.
Repairs & troubleshooting
Diagnosis and repair of outages, circuit failures and equipment issues.
Electrical subcontracting for general contractors
Licensed electrical scope, coordination with the other trades and a clean turnover when you are the general contractor.
Design-build & preconstruction support
Early scope review, sequencing and drawing coordination so the electrical work is planned before the crew arrives.
Also covered
Ready for a scope that reads clearly? Send the short form or call.
Call 888-586-5554Codes & practices
Built to Code, Recorded for Reference
| Area | How we work |
|---|---|
| Codes | NEC (NFPA 70) and your local jurisdiction, with permits handled as part of scope |
| Safety | NFPA 70E practices and your site's rules |
| Records | Panel schedules, labeling and a summary of the work |
Share your hours and your property rules, and the plan wraps around them.
Who we work with
Commercial Clients We Serve
Find your role below and notice how the work fits your week.
Property & facility managers
One accountable team for panels, lighting, standby power and repairs across your properties.
General contractors
Licensed electrical scope, temporary power and coordination for your schedule.
Offices, retail & mixed-use
Work planned around your business hours, with clean handoffs.
Education & public facilities
Documented, inspectable work for schools, colleges and public buildings.
Warehouses & distribution
Power, lighting and equipment hookups for busy buildings.
Data centers & critical facilities
Mission-critical power planning and standby systems.
How we work
Five Steps From First Call to Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your electrical project.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Receive your report and quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05We deliver and support
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
Start small, stay with it
Choose the Agreement That Fits Your Property
Imagine your properties on a plan built around your goals, with one team that already knows your site.
30 Day Agreement
try a focused scope and feel how we work.
90 Day Agreement
enjoy a full quarter of planned service with room to see results.
Annual Agreement
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture Job Site Power Done Right
Read the public facility story below and picture your own project beside it.
Switchgear · South Carolina technical college · Prime contractor on a state project
ELEKproTEK served as prime contractor on a South Carolina technical college project that replaced switchgear and a transformer inside a planned outage window.
- Challenge
- Aging main and lighting distribution panels and a 500 kVA transformer had to come out within a planned outage window.
- What we did
- Replaced them with new switchgear and a 300 kVA transformer, coordinating rigging and the outage plan.
- Result
- New switchgear and transformer in service, with NETA acceptance testing at the finish.
Look at the clean fixtures, the aimed floodlights and the braced temporary pole.




Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine Showing Up, Scoping It and Documenting It
Picture a project where the quote matches the scope and the crew arrives ready.
- ELEKproTEK is licensed and insured.
- Feel the ease of clear scopes, written quotes and clean handoffs.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK keeps hubs in Charleston, Atlanta, Charlotte and Richmond, and the Atlanta office and warehouse keep supplies close. Share your project location and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Choose Your Path
My lights flicker and breakers trip
Repairs, panels, lighting and generators.
Open this path →
My building should run smarter
Lighting controls, energy monitoring and EV charging.
Open this path →
I have an outage window to hit
Switchgear and new power, planned to the day.
Open this path →
My plant needs a brain
PLC, HMI and SCADA from the team that wires the panel.
Open this path →
My readings need to be right
Loop checks and calibration, with the findings written down.
Open this path →
I am in the Atlanta area
Commercial and industrial electricians for Atlanta and nearby cities.
Open this path →
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
What commercial electrical work do you do?
Panel and service upgrades, power distribution, tenant improvements, lighting, generators, EV charging, temporary power and maintenance programs.
Do you provide temporary power for construction sites?
Yes. We install temporary poles, meter bases and grounding for job sites.
Can you work around our business hours?
Yes. Share your hours with the form and we plan scope and timing around them.
Do you work with general contractors?
Yes. We support GCs with licensed electrical scope and coordination.
Are you licensed?
Yes. ELEKproTEK is licensed and insured, and a Master Electrician leads every scope. Tell us your project's location and we confirm the license that applies, and we share license details on request.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.
Every step is spelled out, so you always know what comes next.
Can you handle the electrical for new construction?
Yes. We work from rough-in through turnover on new construction and additions, and we coordinate with the general contractor and the other trades.
A Master Electrician leads the scope, and we leave panel schedules and labeling behind.
How does temporary power for a construction site work?
We set the temporary pole, meter base, disconnect, panel and grounding for the site, then connect it and test it. When the permanent service is ready, we plan the changeover with you.
Send the site address, the timing and the loads you expect.
Do you work as the electrical subcontractor for general contractors?
Yes. We take the electrical scope for general contractors and design-build teams, share schedule updates, and coordinate inspections.
Send the scope, the drawings and the timing, and a Master Electrician reviews it within one business day.
Can you support a tenant improvement or build-out?
Yes. We run the circuits, lighting and equipment power for tenant improvements, and we plan the work around your opening date and your landlord's rules.
Are you a WBE certified electrical contractor?
Yes. ELEKproTEK is WBE certified and Master Electrician-led, and we share certification details on request for owners and general contractors who track supplier diversity.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
One Team for Your Property
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Add a photo of the panel, the meter or the plans, and choose your appointment time next.