Industrial Electrician Services That Make Troubleshooting, Motor Circuits & Power Distribution Easy to Keep Running
Industrial electricians · Troubleshooting · Maintenance
Industrial Electricians Who Find the Cause, Fix It and Document It
Crews led by a Master Electrician for motor circuits, panels, distribution and plant troubleshooting.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
Sound familiar?
Imagine Faults Fixed for Good
You are searching for industrial electricians, so breakers, drives and motor circuits are part of your shift.
The same fault returns, and the reset button carries the shift.
Drawings drift from the panel over the years, so every repair begins with a search.
Repairs get finished while the notes about what changed stay in someone's head.
Picture a panel labeled so well that a stranger could trace it.
What we do
Feel the Calm of Clean Electrical Work
Crews who also understand controls handle day to day plant electrical work and troubleshooting.
Troubleshooting & root-cause diagnosis
Trace the fault, confirm the cause, then fix it.
Motor circuits, starters & VFD wiring
Motor feeds, starters and drives installed and checked.
MCC & panel maintenance and modifications
Clean, label, modify and document.
Equipment hookups & machine installs
Power and controls connections for new and relocated equipment.
Feeders & power distribution
Feeders, disconnects and distribution for plant loads.
Grounding & bonding
Grounding and bonding checked and corrected.
Preventive maintenance programs
Planned inspections that catch problems before they stop production.
Emergency electrical response
Call us when something stops. We start solving it with you.
New construction industrial electrician
Electrical framework for new industrial builds, from the ground up.
Maintenance electrical technician
Proactive maintenance that keeps electrical systems in good condition.
Machinery electrician
Electricians who keep machines and equipment running.
Motor control center installation
MCC installation, modification and upgrades.
Cable tray, conduit & busway installation
Industrial wiring, conduit, cable tray and busway installed to plan.
Switchgear & transformer installation
Three phase power installation, switchgear and transformers.
Arc flash analysis & studies
Arc flash analysis to support a safer plant.
Industrial control systems
Control system upgrades and integration.
Motor troubleshooting & motor circuits
When a motor trips or will not start, we find out whether it is the motor, the starter, the drive or the wiring, then fix the circuit or coordinate repair or replacement.
VFD installation & troubleshooting
Variable frequency drive wiring and installation, setup checks, fault tracing and replacement, with the motor and rotation checked out.
High bay & industrial lighting
High bay and low bay fixtures, LED retrofits and exterior lighting for plants and warehouses, installed, aimed and tested.
Panelboard & distribution installation
Panelboards, disconnects, feeders and distribution equipment installed, labeled and documented for plant loads.
Plant expansion & equipment relocation
Power and wiring for expansions, tenant build-outs, production line moves and relocated machines.
Shutdown & outage electrical support
Extra electricians for planned shutdowns and outages, working to your schedule and your safety rules.
Also covered
Ready to trace that fault for good? Send the short form with a photo of the panel, or call.
Call 888-586-5554Codes & practices
Safe, Documented and Code Compliant
| Area | How we work |
|---|---|
| Codes | NEC (NFPA 70) and your local jurisdiction |
| Safety | NFPA 70E practices, lockout/tagout and your site's safety rules |
| Records | Updated panel schedules, labeling and a summary of the work performed |
Share your lockout and safety rules, and watch us build the work around them.
Industries
Electricians for Plants, Terminals and Critical Facilities
Find your plant type below and notice how the work fits your floor.
Data centers & mission-critical
Critical power and controls where uptime is the product.
Government & public infrastructure
Federal, state and municipal facilities that need documented, inspectable work.
Water & wastewater
Treatment plants, lift stations and process instrumentation. Our founder programmed PLCs and SCADA for water treatment plants before starting ELEKproTEK.
Manufacturing & process
Motor controls, PLC panels and the instruments that feed them.
Distribution & logistics
Conveyors, sorters and material handling that have to run on the first shift.
Bulk liquid terminals & chemical
Tank farms, transmitters and loops that have to read true.
Utilities & critical facilities
Standby power, switchgear and controls for sites that cannot go dark.
How we work
Five Steps From First Call to Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your electrical issue.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Receive your report and quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05We deliver and support
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
Start small, stay with it
Choose the Agreement That Fits Your Plant
Imagine your plant electrical systems on a plan built around your goals, with one team that already knows your site.
30 Day Agreement
try a focused scope and feel how we work.
90 Day Agreement
enjoy a full quarter of planned service with room to see results.
Annual Agreement
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture Your Plant With Records That Answer Questions
Read one field story below and picture the same care at your site.
Instrumentation · Bulk liquid terminal · North Charleston, SC
A bulk liquid terminal in North Charleston, SC asked ELEKproTEK for loop checks, calibration and documented findings.
- Challenge
- A facility with no calibration since its 2013 commissioning needed to know where its instruments stood.
- What we did
- Field loop checks, transmitter verification and calibration, with readings and photos recorded at every loop.
- Result
- A documented findings report with prioritized recommendations, and a 30/90-day remediation plan.
Look at the motor skid, the terminals and the careful wiring.
Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine the Electrician Who Also Understands the Controls
Picture one visit that finds both the power cause and the controls cause.
- ELEKproTEK is licensed and insured.
- Feel the ease of updated labels and a written summary after every job.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK keeps hubs in Charleston, Atlanta, Charlotte and Richmond, and the Atlanta office and warehouse keep supplies close. Share your project location and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Also see: Industrial electrical contractorsIndustrial controls, PLC & SCADAInstrumentation servicesFactory & warehouse automation
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
Do you handle recurring faults and troubleshooting?
Yes. We trace the cause before we repair, and we record what we found.
Can you work on motor controls and VFDs?
Yes. We install, wire and check motor circuits, starters and drives.
Do you update panel labels and records?
Yes. Clean labeling and updated records are part of how we finish.
Can you support planned maintenance?
Yes. The 90-day and annual agreements are built for planned maintenance.
How fast can you start, and do you offer emergency service?
Service requests are received around the clock, 7 days a week, by phone at 888-586-5554 and through the form. Service is by appointment.
New requests are scheduled within 24 hours of first contact when we have availability, weekends included, and the booking page shows open times and an emergency option. Clients already in our system have even easier access to 24/7 coverage.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.
Every step is spelled out, so you always know what comes next.
Can you troubleshoot a motor and tell us whether to repair or replace it?
Yes. We check the motor, the starter or drive, the feeder and the wiring to find where the fault actually is.
Then we tell you whether the circuit needs a fix or the motor needs repair or replacement, and we coordinate the next step. A motor shop handles rewinding and bench repair.
Do you install and troubleshoot VFDs?
Yes. We wire and install variable frequency drives, check setup and rotation, and trace drive faults back to the cause, whether that is the drive, the motor, the cabling or the supply.
Do you install motor control centers, switchgear and transformers?
Yes. We install and modify motor control centers, switchgear, panelboards and transformers, label everything and leave updated records of what changed.
Can you install high bay lighting in a plant or warehouse?
Yes. We install high bay and low bay fixtures, LED retrofits and exterior lighting, then aim and test them. We work around your production schedule where we can.
Can you support a shutdown, plant expansion or equipment relocation?
Yes. Send us the scope and the dates. A Master Electrician reviews every request within one business day and tells you how we can staff and schedule it.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
Crews Led by a Master Electrician
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Add a panel photo to the short form, and choose your appointment time next.