Generator Installation Services: Sizing, Pads, Transfer Switches, Wiring and Commissioning for Commercial & Industrial Sites

Generator installation · Installers for business sites
Generators Installed, Connected and Commissioned
Generator installers for commercial and industrial sites: sizing, pads, transfer switches, wiring, permits and testing, led by a Master Electrician.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away, with your appointment deposit credited toward your total.
Sound familiar?
Imagine Your Generator Running Before the Storm
You are searching for generator installation, so the right size, the right place and a clean startup shape your plan.
Sizing, pads, fuel and wiring each seem to belong to a different trade.
Permits and inspections pile up behind the equipment order.
The unit arrives, and the schedule for the connection is still a question mark.
Picture one plan, one schedule and a Master Electrician leading every step.
From plan to powered up
Feel the Ease of One Plan From Pad to Power
Sizing, permits, pads, transfer switches, wiring, fuel coordination and commissioning fill the cards below.
Generator sizing & selection
Match the generator to the loads you want protected.
Site planning & permits
Pad location, clearances, plans and permit support.
Pads, conduit & trenching
Pads, conduit runs and trenching coordinated for the installation.
Automatic transfer switch installation
Transfer switches mounted, wired and tested.
Wiring & panel connections
Feeders, panels and breakers connected to the generator.
Fuel connections coordination
Coordinate natural gas or fuel supply with the licensed fuel trades.
Commissioning & load testing
Start up, test under load and write down the results.
Monitoring & controls
Remote monitoring and controls connected at startup.
Replacement & upgrades
Replace aging generators and upgrade the connections behind them.
Also covered
Ready for your installation plan? Send the short form with a photo of the site, or call.
Call 888-586-5554How we work
Planned, Tested and Documented
| Area | How we work |
|---|---|
| Scope | A written scope and quote before the work begins |
| Codes | NEC (NFPA 70) and your local jurisdiction |
| Safety | NFPA 70E practices and your site's rules |
| Records | A written summary of what we found and what we did |
| Leadership | A Master Electrician leads every scope |
Tell us about the site and the loads, and feel how quickly the plan takes shape.
Who we work with
Clients We Serve
Find your role below and notice how naturally the work fits.
Property & facility managers
One accountable team for panels, lighting, standby power and repairs.
Owners & developers
Electrical scope from the first quote to the finished records.
General contractors
Electrical coordination that keeps your schedule intact.
Manufacturing & warehouses
Motor circuits, controls and power that keep lines running.
Restaurants, retail & offices
Quick answers and clean work around your business hours.
Government, schools & healthcare
Documented, inspectable work for public and medical buildings.
How we work
Five Steps From First Call to Finished Work and Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Share the site
Call 888-586-5554 or send the short form, and add photos, scope and details for your generator installation.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and every appointment deposit, emergency service included, credits toward your total.
- 03Review your quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Finish the quoted installation
Feel the quoted service come to a close: we deliver the work, commission it, document it and hand you the written summary.
- 05Pick your agreement
Choose your agreement to stay supported: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
From one install to a service plan
First Your Quote Is Resolved, Then Choose the Agreement That Fits Your Site
Imagine the work we quoted finished, tested and written down, and then your sites on a plan built around your goals, with one team that already knows your site.
Install Only
Follow the quoted work with a focused scope and feel how we work.
Install Plus Testing
Follow the quoted work with a full quarter of planned service and room to see results.
Standing Partner
Follow the quoted work with recurring service and planning from one exclusive team.
Your appointment deposit credits toward your total, so your first step already counts toward the work we quoted. The service we quoted is resolved first, every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture a Generator Installed and Commissioned
Read the South Carolina generator story below and picture your own installation beside it.
Standby power · Public schools & commercial · South Carolina
ELEKproTEK installed a generator for a South Carolina school district and connected mobile generators for commercial sites.
- Scope
- Generator replacement for a school district, generator and ATS work, and mobile generator hookup.
- What we did
- Installed, connected and commissioned the equipment with the owner's schedule in mind.
- Result
- Standby and temporary power in place where each site needed it.
Look at the conduit and fittings staged, the open energy storage unit, the stacked battery units and the backup power equipment.




Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine Installers Who Follow the Job Through
Picture the crew that plans your generator also wiring it, testing it and writing it down.
- ELEKproTEK is insured, and a Master Electrician leads every scope.
- Feel the ease of written scopes, plain explanations and clean handoffs.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK serves projects from hubs in Atlanta, Charleston, Charlotte and Richmond. Share your project address and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Choose Your Path
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
What does generator installation include?
Sizing, site planning, pad and conduit work, transfer switch installation, wiring, permits, commissioning and load testing, finished with a written summary.
Who handles the fuel connection?
We coordinate the natural gas or fuel supply with the licensed trades involved and keep the schedule in one place.
How long does a generator installation take?
It depends on the size and the site. After the review, your written quote includes the plan and the schedule.
Do I need a transfer switch?
Yes for automatic standby power. The transfer switch moves your loads to the generator when the utility fails.
Can you replace an existing generator?
Yes. We replace aging units and upgrade the connections behind them.
Do you handle permits and inspections?
We support the permit process and coordinate the inspection.
Can you service the generator after installation?
Yes. Choose an agreement for testing and maintenance, and the same team that installed the unit looks after it.
How fast can you start, and do you offer emergency service?
Service requests are received around the clock, 7 days a week, by phone at 888-586-5554 and through the form. Service is by appointment.
New requests are scheduled within 24 hours of first contact when we have availability, weekends included, and the booking page shows open times and an emergency option. Clients already in our system have even easier access to 24/7 coverage.
Who leads the work?
A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.
Does my appointment deposit count toward the project?
Yes. Every appointment deposit credits toward your project total, emergency service included.
Your project total is at least the amount of the appointment you booked, and the free virtual quote is a free way to start.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, and we complete the service you approved first.
After that, you can choose a 30-day, 90-day or annual agreement to stay supported. Every step is spelled out, so you always know what comes next.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
Tell Us the Site, Choose Your Time
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Add a photo of the site and the main panel, and choose your time next.