Electrical Panel Services: Panel Upgrades, Replacement, Breakers and Subpanels for Commercial & Industrial Buildings

Technician in a lime shirt seen from behind at a large electrical panel, with a low-voltage wiring rack and conduit runs beside it.

Electrical panel services · Upgrades and replacement

Electrical Panels Upgraded, Replaced and Labeled

Panel upgrades, replacement, breakers, subpanels and directories for commercial and industrial buildings, from crews led by a Master Electrician.

Call 888-586-5554

The short form takes about 60 seconds, and Save your appointment sits one tap away, with your appointment deposit credited toward your total.

Led by a Master ElectricianWBE certifiedInsured24/7 service requests

Sound familiar?

Imagine a Panel That Keeps Up With Your Business

You are searching for electrical panel services, so tripping breakers, new equipment and a crowded panel shape your week.

Breakers trip, and the culprit circuit stays a mystery.

New equipment, lighting or chargers are waiting on capacity the panel lacks.

The directory is faded, and every circuit is a guess.

Picture a panel with the capacity you need, the connections tight and every circuit labeled.

What we do with panels

Feel the Ease of a Panel Done Right

Upgrades, replacement, breakers, subpanels, labeling and load calculations fill the cards below.

Electrical panel upgrade

Add the capacity your equipment, lighting and chargers need.

Panel replacement

Replace aging or damaged panels and restore the circuits behind them.

Breaker replacement & troubleshooting

Find the reason a breaker trips and replace the part that failed.

Subpanels & feeders

Add subpanels and feeders to bring power where the work happens.

Panel inspection & labeling

Inspect panels, tighten connections and write clear directories.

Load calculations

Measure what the building draws and plan upgrades against it.

Surge protection

Protect panels and the equipment behind them from surges.

Panels for generators & chargers

Prepare the panel for standby power and EV charging.

Industrial and control panels

Power distribution and control panel work for plants and warehouses.

Also covered

Electrical panel servicesElectrical panel upgradeElectrical panel replacementElectrical panel upgrade serviceElectrical panel contractorElectrical panel electricianCommercial electrical panel upgradeIndustrial electrical panelBreaker panel replacementCircuit breaker replacementSubpanel installationElectrical service upgradePanel upgrade near meElectrical panel inspectionPanel labelingPanelboard installationSwitchgear installationMain breaker replacementLoad center replacementElectrical panel repairElectrical panel installers near me

Ready to see your panel plan? Send the short form with a photo of the panel, or call.

Call 888-586-5554

How we work

Careful, Safe and Labeled

AreaHow we work
ScopeA written scope and quote before the work begins
CodesNEC (NFPA 70) and your local jurisdiction
SafetyNFPA 70E practices and your site's rules
RecordsA written summary of what we found and what we did
LeadershipA Master Electrician leads every scope

Send a photo of the panel, and feel how quickly the picture clears.

Who we work with

Clients We Serve

Find your role below and notice how naturally the work fits.

Property & facility managers

One accountable team for panels, lighting, standby power and repairs.

Owners & developers

Electrical scope from the first quote to the finished records.

General contractors

Electrical coordination that keeps your schedule intact.

Manufacturing & warehouses

Motor circuits, controls and power that keep lines running.

Restaurants, retail & offices

Quick answers and clean work around your business hours.

Government, schools & healthcare

Documented, inspectable work for public and medical buildings.

How we work

Five Steps From First Call to Finished Work and Ongoing Support

Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.

  1. 01
    Share the panel

    Call 888-586-5554 or send the short form, and add photos, scope and details for your panel project.

  2. 02
    Choose your appointment

    Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and every appointment deposit, emergency service included, credits toward your total.

  3. 03
    Review your quote

    Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.

    See an example report →

  4. 04
    Finish the quoted panel work

    Feel the quoted service come to a close: we deliver the work, commission it, document it and hand you the written summary.

  5. 05
    Pick your agreement

    Choose your agreement to stay supported: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.

We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.

From one panel to a panel plan

First Your Quote Is Resolved, Then Choose the Agreement That Fits Your Building

Imagine the work we quoted finished, tested and written down, and then your buildings on a plan built around your goals, with one team that already knows your site.

Single Panel

Follow the quoted work with a focused scope and feel how we work.

Building Plan

Follow the quoted work with a full quarter of planned service and room to see results.

Standing Partner

Follow the quoted work with recurring service and planning from one exclusive team.

Your appointment deposit credits toward your total, so your first step already counts toward the work we quoted. The service we quoted is resolved first, every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.

Proof, not promises

Picture Switchgear Replaced Inside the Window

Read the South Carolina project story below and picture your own panel work beside it.

Switchgear · South Carolina technical college · Prime contractor on a state project

ELEKproTEK served as prime contractor on a South Carolina technical college project that replaced switchgear and a transformer inside a planned outage window.

Challenge
Aging main and lighting distribution panels and a 500 kVA transformer had to come out within a planned outage window.
What we did
Replaced them with new switchgear and a 300 kVA transformer, coordinating rigging and the outage plan.
Result
New switchgear and transformer in service, with NETA acceptance testing at the finish.

Look at the large panel, the headlamp inspection with notes, the drive panel and the relay panel, the everyday detail of the work.

Technician with a headlamp and clipboard standing at an open breaker panel in a narrow utility space.
Panel inspection with notes taken on site.
Open control enclosure with four blue variable frequency drives, terminal strips, and a hand holding a wiring schematic.
Drive panel wiring checked against the schematic.
Control panel interior with a row of PLC modules above rows of relays and labeled terminal blocks.
Labeled wiring and relay rows inside a finished PLC control panel.
Close view inside an open meter socket enclosure showing conductors landed on a main breaker and neutral bar.
Conductors landed inside the meter socket.

Client names stay private by default, and project details are shared with prospective clients on request.

Why ELEKproTEK

Imagine Capacity Planned and Recorded

Picture a team that measures the load, plans the upgrade and hands you the directory.

  • ELEKproTEK is insured, and a Master Electrician leads every scope.
  • Feel the ease of written scopes, plain explanations and clean handoffs.
  • A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.

Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.

She holds the Municipal Association of South Carolina Master Electrician certification.

Where we work

Find Your City and Feel the Local Fit

ELEKproTEK serves projects from hubs in Atlanta, Charleston, Charlotte and Richmond. Share your project address and scope, and we confirm how we support it.

Atlanta, GACharleston, SCCharlotte, NCRichmond, VA

Choose Your Path

My lights flicker and breakers trip

Repairs, panels, lighting and generators.

Open this path →

I have an outage window to hit

Switchgear and new power, planned to the day.

Open this path →

Questions

Imagine Every Question Answered Before You Call

Each answer below comes from how ELEKproTEK works today.

When does a building need an electrical panel upgrade?

Common signs are frequent breaker trips, no room for new circuits, added equipment or chargers, warm panels and an older panel that is hard to service. A Master Electrician reviews your load and recommends the right step.

What is the difference between a panel upgrade and a panel replacement?

An upgrade adds capacity or circuits. A replacement swaps out an aging or damaged panel. Many projects combine both.

Do you work on commercial and industrial panels?

Yes. We work on offices, restaurants, retail, warehouses and plants, including industrial power distribution and control panels.

Can you add a subpanel?

Yes. We add subpanels and feeders to bring power closer to the equipment.

Will the power be off during the work?

Panel work usually needs a planned outage. We schedule it around your business hours and tell you the plan before the day arrives.

Will the panel be labeled when you finish?

Yes. Every panel receives a clear directory, and you receive a written summary of the work.

Do you handle permits and inspections?

We support the permit process and coordinate the inspection.

How fast can you start, and do you offer emergency service?

Service requests are received around the clock, 7 days a week, by phone at 888-586-5554 and through the form. Service is by appointment.

New requests are scheduled within 24 hours of first contact when we have availability, weekends included, and the booking page shows open times and an emergency option. Clients already in our system have even easier access to 24/7 coverage.

Who leads the work?

A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.

Does my appointment deposit count toward the project?

Yes. Every appointment deposit credits toward your project total, emergency service included.

Your project total is at least the amount of the appointment you booked, and the free virtual quote is a free way to start.

What happens after I send the form?

You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, and we complete the service you approved first.

After that, you can choose a 30-day, 90-day or annual agreement to stay supported. Every step is spelled out, so you always know what comes next.

Can you support a project outside your hubs?

Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.

The short form and the phone number sit right below the last answer.

Your first step · about 60 seconds

Show Us the Panel, Choose Your Time

A Master Electrician reviews your request, and you choose the appointment that suits you.

Call 888-586-5554

We Keep Your World Powered. Call 888-586-5554, or Save your appointment.

P.S. Add a photo of the panel with the door open, and choose your time next.