Medium and High Voltage Electrical Contractors: Switchgear, Transformers and Cable Installed on Your Outage Window

Medium and high voltage · Commercial and industrial
Plants, Campuses And Large Buildings Get Power Systems Planned, Installed and Tested With Safety First
Switchgear, transformers, feeders and testing support for industrial and commercial sites from our hubs in Atlanta, Charleston, Charlotte and Richmond, led by a Master Electrician. Share your voltage level and scope, and we confirm how we support it.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
Sound familiar?
Imagine Your Power System Installed, Tested and Energized as Planned
You are searching for a medium or high voltage electrical contractor, so safety planning, careful sequencing and clear records matter more than anything on a brochure.
A new transformer or switchgear lineup is on order, and the installation plan is still open.
The power system needs work, and the outage window is short.
Your site needs a contractor who understands higher-voltage safety and records the work.
Picture an outage window that follows the plan, equipment that tests clean, and a handoff that gives your team the records.
One accountable team from the first review to energization.
What we do
Walk Through a Power Project From Cable Pull to Energization
Switchgear, transformers, cable and testing fill the cards below, with studies, safety and records beside them.
Medium voltage electrical contracting
Installation and modification of medium voltage distribution at industrial and commercial sites. Share your voltage level, and we confirm scope.
High voltage electrical work
Planning and coordination for higher-voltage scopes, with your utility and engineer of record.
Switchgear installation & maintenance
Switchgear lineups set, connected, torqued and recorded.
Transformer installation
Pad-mounted and indoor transformers set, connected and tested.
Cable pulling, termination & splicing support
Feeder and power cable routed, terminated and labeled to plan.
Testing & commissioning
Verification and test records before equipment is energized.
Arc flash & coordination study support
Study coordination and labeling that follow your engineer of record.
Substation & yard coordination
Coordination of yard, duct bank and equipment pad work with your civil and utility partners.
Generators & standby power tie-ins
Generator and transfer equipment connected to your distribution.
Metering, relays & controls connections
Protection and control wiring connected to your gear and tested.
Shutdown & outage planning
Switching, lockout and staging planned with your team before work starts.
Troubleshooting & repair
We trace faults to the cause and record what we found.
Also covered
Ready to plan your power project? Send the short form with your voltage level, drawings and outage window, or call.
Call 888-586-5554Codes & practices
Safety First, Documented Results
| Area | How we work |
|---|---|
| Codes | NEC (NFPA 70), NESC where it applies and your local jurisdiction |
| Safety | NFPA 70E practices, lockout and tagout, and your site's rules |
| Coordination | Work planned with your utility, engineer of record and general contractor |
| Records | Test records, drawings and a written summary of what we did |
| Leadership | A Master Electrician leads every scope |
Send your one-line diagram or equipment list, and watch the scope take shape.
Who we work with
Operations We Power Alongside
Find your operation below and notice the fit.
Manufacturing & process plants
Distribution upgrades and equipment installs planned around production.
Ports, terminals & logistics
Power for large yards, buildings and equipment.
Warehouses & distribution centers
Service and distribution for new and expanding buildings.
Data centers & large campuses
Power equipment and cable work coordinated with your engineer and your schedule.
Hospitals, schools & institutions
Careful outage planning for spaces that stay in service.
General contractors & engineers
A licensed electrical scope that fits your drawings and schedule.
How we work
Five Steps From First Call to Finished Handoff
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your power project.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Receive your report and quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05We deliver and support
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
Resolve it, then stay with it
Settle the Scope First, Then Choose Your Agreement
Your quoted power project gets resolved first, and the agreements that follow keep one team familiar with your equipment, your one-line diagram and your records.
30 Day Agreement
try a focused scope and feel how we work.
90 Day Agreement
enjoy a full quarter of planned service with room to see results.
Annual Agreement
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture the Handoff Your Team Receives
Every power project ends the same way, and the card below shows what lands in your hands.
Every power scope · Atlanta, Charleston, Charlotte and Richmond
A finished project arrives with the equipment connected, the tests recorded and the records handed over.
- Before the work
- A Master Electrician reviews your request within one business day, and you receive a written report and quote.
- During the work
- The crew installs, terminates, tests and sequences the work with your utility, engineer and outage window.
- At the handoff
- You receive test records, labeled equipment and a team available for support.
Look at the switchgear cabinet, the labeled control wiring and the relay panel check.


Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine One Team From Review to Energization
Picture a power project that ends with tested equipment, clear records and a team that answers the phone.
- ELEKproTEK is licensed and insured.
- Feel the ease of plain explanations and outage work planned around your production schedule.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK serves medium and high voltage scopes from hubs in Atlanta, Charleston, Charlotte and Richmond, and takes projects beyond them case by case. Share your site address, voltage level and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Also see: Medium voltage electrical contractor Charleston SCIndustrial electrical contractorsIndustrial electriciansCommercial electrical contractorsIndustrial controls, PLC and SCADAHigh voltage installation in CharlestonCharleston, SC electricians
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
What does a medium voltage electrical contractor do?
A medium voltage electrical contractor installs and works on the distribution equipment between the utility and your building loads, such as switchgear, transformers and power cable.
Our crews cover installation, termination, testing and records, planned with your engineer and your utility.
What is the difference between medium and high voltage?
The exact ranges depend on the standard and the utility. Share your voltage level and equipment list with the form, and a Master Electrician confirms how we support the scope.
Do you install switchgear and transformers?
Yes. We set, connect and test switchgear and transformers at commercial and industrial sites, following your drawings and engineer of record.
Can you work with our utility and engineer?
Yes. We plan the sequence, outage windows and switching steps with your utility, engineer of record and general contractor before work starts.
Do you provide testing and commissioning?
We support verification and commissioning with recorded results. Share your testing requirements with the form, and we confirm what we perform and what a specialty testing partner covers.
Do you support arc flash and coordination studies?
We coordinate with your engineer of record and apply the labeling and settings their study calls for.
How do you plan outages?
We plan switching, lockout and staging with your team before the first breaker opens, so the work follows the plan.
Where do you work?
We serve our hub regions around Atlanta, Charleston, Charlotte and Richmond, and we take projects beyond them case by case. Send the form with the site address and scope, and we confirm timing with you.
Who leads the work?
A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.
Who is the best medium voltage electrical contractor?
The best fit is a licensed team that plans safety first, coordinates with your utility and engineer, tests thoroughly and documents the finished work.
ELEKproTEK is built around that: a Master Electrician leads every scope, and you receive a written report and test records. Send the short form and compare for yourself.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.
Every step is spelled out, so you always know what comes next.
Does my appointment deposit count toward the project?
Yes. Every service appointment deposit credits toward your project total, and the booking page shows the details for the appointment you choose.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
Your Power Project, Led by a Master Electrician
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Attach your one-line diagram or equipment list, and choose your time next.