Controls Integrator in Charleston SC: PLC, HMI and SCADA Systems That Start Up Smoothly and Keep Running

Charleston, SC · Controls integrator
Charleston Plants Get Controls That Start Up Smoothly And Keep Running
PLC programming, HMI and SCADA, control panels and field wiring from one crew, for plants, ports and process sites in Charleston, North Charleston, Summerville and across South Carolina, led by a Master Electrician.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away.
Sound familiar?
Imagine Your Charleston Controls Clear, Documented and Calm
You are searching for a controls integrator in Charleston, so you want one team that can design the logic, build the panel and stand beside the start-up.
The PLC code has been edited by so many hands that nobody wants to touch it.
The HMI shows an alarm, and the cabinet drawings point somewhere else.
New equipment is landing, and the controls plan is still a sketch.
Picture a cabinet with clean wiring, labeled terminals, tested logic and a handoff packet that your own technicians can read.
One accountable team from the first drawing to the last loop check.
What we do
Feel Controls Work Done Right in Charleston
PLC and HMI programming, SCADA, control panels and field wiring fill the cards below, with instrumentation and power for controls beside them.
PLC programming & retrofits
New logic, migrations and retrofits for plants, with tested code and clear documentation.
HMI & SCADA programming
Operator screens, alarms and trends built so your team reads the process at a glance.
Control panel design & build
Control panels built to UL 508A practices, wired, labeled and tested before they ship.
Instrumentation, loop checks & calibration
4-20 mA loops, transmitters and field devices checked and calibrated, with the results written down.
Controls troubleshooting & repair
We trace faults through code, wiring and field devices to the cause before parts get replaced.
Variable frequency drives & motor control
Drives, starters and motor control centers wired, programmed and commissioned.
Networks & remote monitoring
Industrial networks and remote access planned with your IT team.
Commissioning & start-up support
Factory acceptance, site testing and start-up support, with records at the finish.
Field wiring & power for controls
Conduit, cable, terminations and power installed by the crew that knows the panel.
Warehouse & factory automation controls
Conveyor, sortation and equipment controls for distribution and production floors.
Building & process controls
Process controls and building automation scopes for commercial and industrial sites.
Emergency controls support
Call when the line is down, and a licensed team member picks up the phone.
Also covered
Ready to put your controls in one team's hands? Send the short form with your scope or drawings, or call.
Call 888-586-5554Codes & practices
Careful Work, Documented Handoff
| Area | How we work |
|---|---|
| Codes | NEC (NFPA 70) and your local jurisdiction |
| Panels | Built to UL 508A practices, wired, labeled and tested |
| Platforms | Allen-Bradley and Rockwell, Siemens, Schneider, Omron, Mitsubishi, AutomationDirect and Ignition |
| Records | Drawings, code backups and a written summary of what we did |
| Leadership | A Master Electrician leads every scope |
Send your drawings or a photo of the cabinet, and watch the scope take shape.
Who we work with
Charleston Teams We Build Controls For
Find your role below and notice the fit.
Plant engineers & maintenance teams
A controls partner that works alongside your own technicians and documents everything.
Manufacturing & process plants
PLC, HMI and SCADA that keep lines running and operators informed.
Warehouses & distribution
Conveyor, sortation and dock equipment controls for busy buildings.
Water, wastewater & public infrastructure
Controls, instrumentation and SCADA for critical facilities.
Ports, terminals & logistics
Equipment controls and field wiring for large yards and terminals.
General & mechanical contractors
A licensed controls and electrical scope that fits your schedule.
How we work
Five Steps From First Call to Finished Handoff
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Call or send the form
Call 888-586-5554 or send the short form, and add photos, scope and details for your controls project.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.
- 03Receive your report and quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Choose your agreement
Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
- 05We deliver and support
Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
Resolve it, then stay with it
Settle the Scope First, Then Choose Your Agreement
Your quoted controls project gets resolved first, and the agreements that follow keep one team familiar with your plant, your code and your cabinets.
30 Day Agreement
try a focused scope and feel how we work.
90 Day Agreement
enjoy a full quarter of planned service with room to see results.
Annual Agreement
settle into recurring service and planning with one exclusive team.
Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture the Handoff Your Plant Receives
Every Charleston controls project ends the same way, and the card below shows what lands in your hands.
Every controls scope · Charleston and South Carolina
A finished project arrives with the logic tested, the panel labeled and the records handed over.
- Before the work
- A Master Electrician reviews your request within one business day, and you receive a written report and quote.
- During the work
- The crew builds, wires, programs and tests, then supports your start-up.
- At the handoff
- You receive drawings, code backups, test records and a team available for support.
Look at the loop check, the control room, the PLC cabinet and the pump skid.




Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine One Team From Drawing to Start-Up
Picture a Charleston controls project that ends with tested logic, labeled cabinets and a team that answers the phone.
- ELEKproTEK is licensed and insured.
- Feel the ease of plain explanations and outage work planned around your production schedule.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK keeps a hub in Charleston and serves North Charleston, Hanahan, Goose Creek, Summerville and Mount Pleasant, and works across South Carolina, alongside hubs in Atlanta, Charlotte and Richmond. Share your site address and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Also see: Industrial controls, PLC and SCADAInstrumentation servicesFactory and warehouse automationIndustrial electrician CharlestonCharleston, SC electricians
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
What does a controls integrator do?
A controls integrator designs, programs, builds and commissions the control systems that run machines and processes: PLC logic, HMI and SCADA screens, control panels, field wiring and instrumentation.
Our crews cover the programming and the wiring, so one team owns the whole system.
Do you handle PLC programming in Charleston?
Yes. We write, retrofit and troubleshoot PLC programs, and we document the logic and keep code backups for you.
Can you program HMI and SCADA screens?
Yes. We build operator screens, alarms and trends, and we connect them to your PLCs and field devices.
Do you build control panels?
Yes. We build control panels to UL 508A practices, wired, labeled and tested before they leave the shop. Ask us what listing paperwork your project needs.
Can you retrofit or migrate an older PLC system?
Yes. We plan retrofits in stages around your production schedule, test the new logic and hand over updated drawings.
Do you work on instrumentation and loop checks?
Yes. We check and calibrate 4-20 mA loops and transmitters and record the results. The instrumentation page on this site goes deeper.
Do you serve plants outside Charleston?
We serve Charleston and the surrounding area from our hub, and we take South Carolina projects. Send the form with the site address and scope, and we confirm timing with you.
Who leads the work?
A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.
Who is the best controls integrator in Charleston SC?
The best fit is a licensed team that writes clear logic, builds clean panels, documents everything and stays through start-up.
ELEKproTEK is built around that: a Master Electrician leads every scope, and you receive drawings, code backups and test records. Send the short form and compare for yourself.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.
Every step is spelled out, so you always know what comes next.
Does my appointment deposit count toward the project?
Yes. Every service appointment deposit credits toward your project total, and the booking page shows the details for the appointment you choose.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
Your Charleston Controls, Led by a Master Electrician
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Attach a drawing or a photo of the cabinet, and choose your time next.