Commercial and Industrial Generator Installation: Sized, Set, Wired and Load Tested Before the Next Outage Finds You

Two technicians in reflective jackets working at the open control cabinet of a green generator at night

Generator installation · Commercial and industrial

Commercial And Industrial Sites Get Backup Power Installed, Connected and Proven Under Load

Generator sizing, pads, transfer switches, wiring and commissioning for commercial and industrial facilities, led by a Master Electrician from our hubs in Atlanta, Charleston, Charlotte and Richmond.

Call 888-586-5554

The short form takes about 60 seconds, and Save your appointment sits one tap away.

Led by a Master ElectricianWBE certifiedLicensed and insured24/7 service requests

Before the next outage

Picture the Next Outage Passing Without Anyone Noticing

You are looking for commercial or industrial generator installation, so uptime, code compliance and a clean handoff matter more than a catalog of models.

The generator is chosen, and nobody has written down who sets the pad, runs the conduit and connects the transfer switch.

Your backup power has never carried a real load, and you are trusting that it starts when the grid drops.

The permit, the fuel connection and the inspection sit on different desks, and the install date keeps sliding.

Imagine a transfer switch that moves the load, a generator that carries it and a written record of the test.

One accountable team from the site walk to the load test.

What we do

Follow a Generator Install From Pad to Proven Power

Sizing, pad, wiring, transfer switch and testing fill the cards below, with fuel coordination and monitoring beside them.

Generator sizing & selection

A Master Electrician reviews your critical loads with you, and the generator is matched to what must stay on.

Site planning & permit support

Placement, clearances and permit paperwork planned before equipment arrives.

Pads, conduit & trenching

Pads set and conduit and trenches routed to the plan, ready for the generator.

Automatic transfer switch installation

Transfer switches installed so the load moves to the generator and back as designed.

Wiring & panel connections

Feeders, controls and distribution connected, torqued and labeled.

Fuel connection coordination

Natural gas and diesel connections coordinated with your fuel provider and your inspector.

Commissioning & load testing

The system started, loaded and recorded before we call it done.

Monitoring & controls connections

Controls and monitoring wired so your team can see generator status.

Generator replacement & upgrades

Aging units replaced and upgraded, with the transfer and distribution side reviewed too.

Temporary generator hookups

Temporary and mobile generators connected safely while permanent power is planned or restored.

Whole-building & critical-load backup

Backup for the whole building or only the loads that must stay on, laid out in your distribution.

Records & handoff

Test results, settings and a written summary delivered at the end.

Also covered

Commercial generator installationCommercial generator installation servicesCommercial generator installersIndustrial generator installationIndustrial generator installation servicesIndustrial generator installersStandby generator installationEmergency generator installerBackup generator installation for businessGenerator installation companyAutomatic transfer switch installationGenerator replacementGenerator hookupNatural gas generator installationDiesel generator installation

Ready to plan your backup power? Send the short form with your site details and the loads that must stay on, or call.

Call 888-586-5554

Codes & practices

Built to Code, Proven Under Load

AreaHow we work
CodesNEC (NFPA 70) requirements for emergency and standby systems, and your local jurisdiction
SafetyNFPA 70E practices, lockout and tagout, and your site's rules
Fuel and permitsFuel connections and permits coordinated with your provider and your inspector
TestingStart-up and load testing recorded before handoff
LeadershipA Master Electrician leads every scope

Send your panel schedule or a photo of your service equipment, and watch the scope take shape.

Who we work with

Sites That Cannot Afford the Dark

Find your operation below and notice the fit.

Water & wastewater facilities

Pump stations and treatment sites that must keep running when the grid drops.

Government & public infrastructure

Municipal buildings, schools and public sites that need backup power for critical operations.

Data centers & critical facilities

Backup power connections coordinated with your engineer of record and your uptime requirements.

Manufacturing & process plants

Backup for the controls, lines and loads that hurt most when they stop.

Warehouses, distribution & cold storage

Backup for refrigeration, dock doors, lighting and building systems.

Commercial buildings & campuses

Offices, retail and multi-tenant buildings that keep critical loads running.

How we work

Five Steps From First Call to Running Generator

Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.

  1. 01
    Call or send the form

    Call 888-586-5554 or send the short form, and add photos, scope and details for your generator installation.

  2. 02
    Choose your appointment

    Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.

  3. 03
    Receive your report and quote

    Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.

    See an example report →

  4. 04
    Choose your agreement

    Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.

  5. 05
    We deliver and support

    See the handoff: we deliver the work, commission it, document it and stay beside you for support.

We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.

Resolve it, then stay with it

Settle the Install First, Then Choose Your Agreement

Your quoted installation gets resolved first, and the agreements that follow keep one team familiar with your generator, your transfer switch and your test records.

30 Day Agreement

try a focused scope and see how we work.

90 Day Agreement

enjoy a full quarter of planned service with room to see results.

Annual Agreement

settle into recurring service and planning with one exclusive team.

Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.

Proof, not promises

Picture the Handoff Your Facilities Team Receives

Every generator installation ends the same way, and the card below shows what lands in your hands.

Every generator installation · Commercial and industrial sites

A finished installation arrives with the generator running, the transfer switch proven and the test written down.

Before the work
A Master Electrician reviews your request within one business day, and you receive a written report and quote.
During the work
The crew sets the pad, runs conduit, connects the transfer switch and generator, then starts and loads the system.
At the handoff
You receive test records, labeled equipment and a team available for support.

Look at a standby generator on its pad, a technician at a generator control panel and a controller screen during a check.

Yellow standby generator on a gravel pad inside a fenced site with a technician in a reflective vest and umbrella
A standby generator on its pad at a fenced site
Technician pointing at the touchscreen on a generator control panel with an emergency stop and indicator lights
Control panel check on a generator
Generator controller touchscreen showing output voltage, apparent power, current and engine coolant temperature
Generator controller showing voltage, load and engine temperature

Client names stay private by default, and project details are shared with prospective clients on request.

Why ELEKproTEK

Imagine One Team From Site Walk to Load Test

Picture a generator installation that ends with proven power, clear records and a team that answers the phone.

  • ELEKproTEK is licensed and insured, and every scope is reviewed by a Master Electrician before you receive a quote.
  • Enjoy plain explanations, and install work planned around your operating schedule.
  • A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.

Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.

She holds the Municipal Association of South Carolina Master Electrician certification.

Where we work

Find Your Hub, See Where We Install

ELEKproTEK supports generator installations from hubs in Atlanta, Charleston, Charlotte and Richmond, and takes projects beyond them case by case. Share your site address, critical loads and timeline, and we confirm how we support it.

Atlanta, GACharleston, SCCharlotte, NCRichmond, VA

Also see: Generator service, testing and temporary powerCommercial electrical contractorsIndustrial electrical contractorsMedium and high voltage electrical contractorsIndustrial electriciansCharleston, SC electricians

Questions

Imagine Every Question Answered Before You Call

Each answer below comes from how ELEKproTEK works today.

What does commercial generator installation include?

It covers the full path from plan to proof: site planning and permits, the pad, conduit and trenching, the automatic transfer switch, wiring and panel connections, fuel connection coordination, start-up and load testing, and written records.

A Master Electrician leads every scope, so the electrical side is planned before the generator arrives.

What is the difference between commercial and industrial generator installation?

Industrial sites usually carry process equipment, motors and controls that shape how the generator must start and carry the load. Commercial buildings focus on life safety, building systems and critical loads.

Our crews handle both, and one team can plan a site that mixes offices with production space.

How do you size a generator for my site?

A Master Electrician reviews the loads that must stay on, how they start and run, and your fuel and space options. Send your panel schedule, a one-line diagram or photos of your service equipment with the form, and we take it from there.

If an engineer of record specified the unit, we install to their design.

Natural gas or diesel generator?

We install both. The better fit depends on fuel availability at your site, how long the system must run, code requirements and your maintenance plans. We coordinate the connection with your fuel provider and your inspector.

Do you install automatic transfer switches?

Yes. The transfer switch is what moves your load to the generator and back, so we install it as part of the plan and test the transfer during commissioning.

Do you handle permits and inspections?

We support the permit paperwork and coordinate with your inspector, and with your utility where the scope calls for it, so the install date does not slide.

Can you replace or upgrade an existing generator?

Yes. We replace aging units, and we review the transfer switch, wiring and distribution around them so the new generator works with the rest of the system.

Do you connect temporary or rental generators?

Yes. We connect temporary and mobile generators to your distribution safely, whether power is being restored or a permanent system is still being planned.

Who is the best commercial generator installation company?

The best fit is a team that plans the electrical side first, installs to code, proves the system under load and documents the result.

ELEKproTEK is built around that: a Master Electrician leads every scope, and you receive a written report and test records. Send the short form and compare for yourself.

What happens after the generator is installed?

Load testing is part of commissioning, and you receive the results. The 30-day, 90-day and annual agreements keep one team familiar with your system, and our generators page covers service, testing and temporary power.

What happens after I send the form?

You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.

Every step is spelled out, so you always know what comes next.

Does my appointment deposit count toward the project?

Yes. Every service appointment deposit credits toward your project total, and the booking page shows the details for the appointment you choose.

Where do you work?

We support generator installations from our hubs in Atlanta, Charleston, Charlotte and Richmond, and we take projects beyond them case by case. Send the form with the site address and scope, and we confirm how we support it.

The short form and the phone number sit right below the last answer.

Your first step · about 60 seconds

Your Backup Power, Led by a Master Electrician

A Master Electrician reviews your request, and you choose the appointment that suits you.

Call 888-586-5554

We Keep Your World Powered. Call 888-586-5554, or Save your appointment.

P.S. Add your panel schedule, a photo of your service equipment or the generator nameplate, and choose your time next.