Electrical Contractors Near Me Who Handle Commercial & Industrial Work From the First Scope to the Finished Records
Electrical contractors · Commercial and industrial
Electrical Contractors Who Own the Job From Quote to Handoff
New construction, panels and switchgear, lighting, generators, controls and repairs for commercial and industrial properties, from crews led by a Master Electrician.
Call 888-586-5554The short form takes about 60 seconds, and Save your appointment sits one tap away, with your appointment deposit credited toward your total.
Sound familiar?
Imagine One Electrical Contractor for the Whole Scope
You are searching for an electrical contractor, so the scope, the schedule and the finished records shape your whole project.
You ask for a quote, and the scope arrives vague.
The electricians, the controls crew and the paperwork come from three different companies.
An inspector or a new owner asks what was done, and the record lives in someone's truck.
Picture one contractor with the scope on paper, the crew on site and the records in your hands.
One contractor, the whole scope
Feel the Ease of One Contractor for the Whole Job
Power, lighting, standby systems, controls and instruments fill the cards below.
Electrical repair & troubleshooting
Trace faults to the cause, repair what is failing and record the fix.
Panels, switchgear & power distribution
Panels, switchgear, transformers and distribution sized for your loads, with labeled directories.
New construction & tenant improvement electrical
Electrical scope for new buildings, build outs and renovations, planned around your schedule.
Lighting & parking lot lighting
Interior, exterior and parking lot lighting installed, aimed and tested.
Generators & standby power
Generators and automatic transfer switches installed, connected and tested.
EV charger installation
Commercial chargers installed on circuits sized for the load.
Industrial controls, PLC & automation
Control panels, PLC, HMI and SCADA work from the crew that wires the panel.
Instrumentation & calibration
Transmitters and loops checked and calibrated, with every reading written down.
Also covered
Ready to see your scope on paper? Send the short form with a photo, or call.
Call 888-586-5554How we contract
Scoped, Safe and Documented
| Area | How we work |
|---|---|
| Scope | A written scope and quote before the work begins |
| Codes | NEC (NFPA 70) and the local jurisdiction that holds your project |
| Safety | NFPA 70E practices and your site's rules |
| Records | A written summary of what we found and what we did |
| Leadership | A Master Electrician leads every scope |
Tell us about the project, and feel how quickly the picture clears.
Who we work with
Clients We Contract With
Find your role below and notice the fit.
Owners & developers
One accountable contractor from the first scope to the finished records.
General contractors
Electrical scope and coordination that keeps your schedule intact.
Property & facility managers
Panels, lighting, standby power and repairs across your properties.
Manufacturing & process plants
Motor circuits, controls and instrumentation that keep lines running.
Government, schools & public agencies
Documented, inspectable work for public buildings.
Healthcare & medical buildings
Standby power and distribution planned around patient hours.
How we work
Five Steps From First Call to Finished Work and Ongoing Support
Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.
- 01Share the project
Call 888-586-5554 or send the short form, and add photos, scope and details for your electrical project.
- 02Choose your appointment
Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and every appointment deposit, emergency service included, credits toward your total.
- 03Review your quote
Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.
- 04Deliver the quoted scope
Feel the quoted service come to a close: we deliver the work, commission it, document it and hand you the written summary.
- 05Pick your agreement
Choose your agreement to stay supported: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.
We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.
From one contract to a standing partner
First Your Quote Is Resolved, Then Choose the Agreement That Fits Your Property
Imagine the work we quoted finished, tested and written down, and then your properties on a plan built around your goals, with one team that already knows your site.
Single Scope
Follow the quoted work with a focused scope and feel how we work.
Phased Plan
Follow the quoted work with a full quarter of planned service and room to see results.
Standing Partner
Follow the quoted work with recurring service and planning from one exclusive team.
Your appointment deposit credits toward your total, so your first step already counts toward the work we quoted. The service we quoted is resolved first, every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.
Proof, not promises
Picture Switchgear Replaced Inside the Window
Read the South Carolina project story below and picture your own project beside it.
Switchgear · South Carolina technical college · Prime contractor on a state project
ELEKproTEK served as prime contractor on a South Carolina technical college project that replaced switchgear and a transformer inside a planned outage window.
- Challenge
- Aging main and lighting distribution panels and a 500 kVA transformer had to come out within a planned outage window.
- What we did
- Replaced them with new switchgear and a 300 kVA transformer, coordinating rigging and the outage plan.
- Result
- New switchgear and transformer in service, with NETA acceptance testing at the finish.
Look at the wire landing in the breaker panel, the service panel on the concrete wall, the open panel beside the charger and the canopy fixture being aimed at night.
Client names stay private by default, and project details are shared with prospective clients on request.
Why ELEKproTEK
Imagine Scoped, Built and Recorded
Picture a project where the quote matches the scope and the records land in your hands.
- ELEKproTEK is insured, and a Master Electrician leads every scope.
- Feel the ease of written scopes, plain explanations and clean handoffs.
- A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.
Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.
She holds the Municipal Association of South Carolina Master Electrician certification.
Where we work
Find Your City and Feel the Local Fit
ELEKproTEK serves electrical projects from hubs in Atlanta, Charleston, Charlotte and Richmond. Share your project address and scope, and we confirm how we support it.
Atlanta, GACharleston, SCCharlotte, NCRichmond, VA
Choose Your Path
I am building out a space
New construction, build outs and temporary power.
Open this path →
I have an outage window to hit
Switchgear and new power, planned to the day.
Open this path →
My lights flicker and breakers trip
Repairs, panels, lighting and generators.
Open this path →
Something keeps stopping my plant
Troubleshooting, motor circuits and power distribution.
Open this path →
My building should run smarter
Lighting controls, energy monitoring and EV charging.
Open this path →
My plant needs a brain
PLC, HMI and SCADA from the team that wires the panel.
Open this path →
Questions
Imagine Every Question Answered Before You Call
Each answer below comes from how ELEKproTEK works today.
What does an electrical contractor do?
An electrical contractor plans, installs, repairs and tests electrical systems for buildings and plants, and answers for the finished work. ELEKproTEK does that for commercial and industrial properties, with controls, instrumentation and automation from the same team.
What is the difference between an electrical contractor and an electrician?
An electrician performs electrical work. An electrical contractor is the company that takes on the project, leads the crew and answers for the finished scope.
ELEKproTEK is the contractor, and a Master Electrician leads every scope.
How do I choose an electrical contractor?
Ask who finds the cause, who explains the fix and who writes down what changed. Ask for the written scope before work begins, and ask who leads the crew.
At ELEKproTEK, a Master Electrician leads every scope and every visit ends with a written summary.
Do you work on both commercial and industrial projects?
Yes. The same team handles offices, restaurants, retail, warehouses, plants and public buildings, which helps when one property has more than one kind of electrical need.
Do you work with general contractors, owners and public agencies?
Yes. We support owners, general contractors, property managers and public agencies with electrical scope and coordination, and we confirm the contracting details for your project when you request your quote.
Do you handle controls and automation as well as power?
Yes. The same team handles PLC and SCADA, instrumentation and calibration, and building and factory automation beside the electrical scope.
How fast can you start, and do you offer emergency service?
Service requests are received around the clock, 7 days a week, by phone at 888-586-5554 and through the form. Service is by appointment.
New requests are scheduled within 24 hours of first contact when we have availability, weekends included, and the booking page shows open times and an emergency option. Clients already in our system have even easier access to 24/7 coverage.
Who leads the work?
A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.
Does my appointment deposit count toward the project?
Yes. Every appointment deposit credits toward your project total, emergency service included.
Your project total is at least the amount of the appointment you booked, and the free virtual quote is a free way to start.
What happens after I send the form?
You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, and we complete the service you approved first.
After that, you can choose a 30-day, 90-day or annual agreement to stay supported. Every step is spelled out, so you always know what comes next.
Can you support a project outside your hubs?
Our hubs are Atlanta, Charleston, Charlotte and Richmond. Send the form with your project location and scope, and we confirm what is possible.
The short form and the phone number sit right below the last answer.
Your first step · about 60 seconds
Tell Us the Scope, Choose Your Time
A Master Electrician reviews your request, and you choose the appointment that suits you.
Call 888-586-5554We Keep Your World Powered. Call 888-586-5554, or Save your appointment.
P.S. Add a photo of the panel, the plans or the trouble spot, and choose your time next.