Industrial Automation Company in Charleston SC: Warehouse and Factory Systems That Move More With Fewer Stops

Technician in a white hard hat and lime hooded shirt kneeling at a conveyor sorter, wiring controls beside a tool bag

Charleston, SC · Industrial automation company

Charleston Warehouses And Factories Get Automation That Moves More With Fewer Stops

Conveyor, sortation and equipment controls, power and field wiring for warehouses, factories and plants in Charleston, North Charleston, Summerville and across South Carolina, led by a Master Electrician.

Call 888-586-5554

The short form takes about 60 seconds, and Save your appointment sits one tap away.

Led by a Master ElectricianWBE certifiedLicensed and insured24/7 service requests

Sound familiar?

Imagine Your Charleston Floor Moving Smoothly Every Shift

You are searching for an industrial automation company in Charleston, so throughput, uptime and a clean start-up matter more than anything on the sales sheet.

New automation equipment is arriving, and the power and controls plan is still on paper.

A conveyor line stops often, and each stop takes a long time to explain.

The vendor installs the equipment, and someone still needs to wire, power and commission it.

Picture an automation project where the power, controls and field wiring land together, and the line starts on the day you planned.

One accountable team that connects the equipment to your building.

What we do

Feel an Automation Project Come Together in Charleston

Conveyors, sortation, controls and power fill the cards below, with SCADA, instrumentation and standby systems beside them.

Warehouse automation systems

Power, controls and field wiring for conveyors, sortation and material handling in distribution buildings.

Conveyor & sorter controls

Control wiring, sensors and network connections for conveyor and sorter lines, tested before start-up.

PLC, HMI & SCADA integration

Logic, operator screens and monitoring tied into the equipment your vendor delivers.

Power distribution for equipment

Feeders, panels and disconnects sized for new automation loads.

Drives, motors & motor control

Variable frequency drives, starters and motor control centers wired and commissioned.

Sensors, instrumentation & field devices

Sensors and field devices installed, checked and recorded.

Robotics & equipment hookups

Power and controls for robotics cells and new, moved or reinstalled equipment.

Commissioning & start-up support

Testing, verification and start-up support, with records at the finish.

Networks & remote monitoring

Industrial networks and monitoring planned with your IT team.

Troubleshooting & repair

We trace stops and faults to the cause before parts get replaced.

Plant & warehouse lighting

High-bay and dock lighting installed, aimed and tested.

Emergency automation support

Call when the line is down, and a licensed team member picks up the phone.

Also covered

Industrial automation company Charleston SCIndustrial automation companyIndustrial automation Charleston SCIndustrial automation systems integrator Charleston SCWarehouse automation systems Charleston SCWarehouse automation systemsWarehouse automation Charleston SCWarehouse roboticsFactory automation Charleston SCFactory automation South CarolinaManufacturing automation South CarolinaConveyor controls Charleston SCConveyor system electrical Charleston SCSortation system controls Charleston SCMaterial handling electrical Charleston SCDistribution center electrical contractor Charleston SCWarehouse electrician Charleston SCIndustrial controls Charleston SCPLC programming Charleston SCSCADA integrator South CarolinaControls integrator Charleston SCAutomation integrator Charleston SCIndustrial electrician Charleston SCIndustrial electrical contractor Charleston SCPort electrical contractor Charleston SCMotor control center installation South CarolinaVariable frequency drive installation Charleston SCMaster electrician Charleston SCWBE electrical contractor South CarolinaWomen owned electrical contractor South Carolina

Ready to connect your automation to your building? Send the short form with your scope or layout, or call.

Call 888-586-5554

Codes & practices

Careful Work, Documented Handoff

AreaHow we work
CodesNEC (NFPA 70) and your local jurisdiction
SafetyNFPA 70E practices, lockout and your site's rules
CoordinationWork sequenced with your equipment vendor and your general contractor
RecordsTest records, drawings and a written summary of what we did
LeadershipA Master Electrician leads every scope

Send your layout or a vendor drawing, and watch the scope take shape.

Who we work with

Charleston Operations We Automate Alongside

Find your operation below and notice the fit.

Warehouses & distribution centers

Conveyor, sortation and dock equipment power and controls, planned around your shipping hours.

Manufacturing & process plants

Line controls, drives and field wiring that keep production moving.

Ports, terminals & logistics

Equipment power and controls for large yards and terminals.

Food, beverage & cold storage

Refrigeration and line controls serviced with care.

Operations & plant engineers

A licensed partner that works alongside your own technicians and vendors.

General & mechanical contractors

A licensed electrical and controls scope that fits your schedule.

How we work

Five Steps From First Call to Finished Handoff

Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.

  1. 01
    Call or send the form

    Call 888-586-5554 or send the short form, and add photos, scope and details for your automation project.

  2. 02
    Choose your appointment

    Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.

  3. 03
    Receive your report and quote

    Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.

    See an example report →

  4. 04
    Choose your agreement

    Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.

  5. 05
    We deliver and support

    Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.

We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.

Resolve it, then stay with it

Settle the Scope First, Then Choose Your Agreement

Your quoted automation project gets resolved first, and the agreements that follow keep one team familiar with your building, your equipment and your controls.

30 Day Agreement

try a focused scope and feel how we work.

90 Day Agreement

enjoy a full quarter of planned service with room to see results.

Annual Agreement

settle into recurring service and planning with one exclusive team.

Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.

Proof, not promises

Picture the Handoff Your Operation Receives

Every Charleston automation project ends the same way, and the card below shows what lands in your hands.

Every automation scope · Charleston and South Carolina

A finished project arrives with the equipment powered, the controls tested and the records handed over.

Before the work
A Master Electrician reviews your request within one business day, and you receive a written report and quote.
During the work
The crew installs, wires, tests and sequences the work with your vendor and your schedule.
At the handoff
You receive test records, labeled cabinets and a team available for support.

Look at the dock door controls, the loading dock, the drive panel and the PLC relay panel.

Technician in a lime cap wiring a control box beside a roll-up door operator chain near an exit sign
Control wiring beside a dock door operator
Technician kneeling in a concrete loading dock bay beside a bright LED strip light with tools laid out on a board
Dock bay lighting and tools laid out for the job
Open control enclosure with four blue variable frequency drives, terminal strips and a hand holding a wiring schematic
Drive panel checked against the schematic
Control panel interior with a row of PLC modules above rows of relays and labeled terminal blocks
PLC and relay panel with labeled terminal blocks

Client names stay private by default, and project details are shared with prospective clients on request.

Why ELEKproTEK

Imagine One Team From Layout to Start-Up

Picture a Charleston automation project that ends with powered equipment, tested controls and a team that answers the phone.

  • ELEKproTEK is licensed and insured.
  • Feel the ease of plain explanations and outage work planned around your production schedule.
  • A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.

Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.

She holds the Municipal Association of South Carolina Master Electrician certification.

Where we work

Find Your City and Feel the Local Fit

ELEKproTEK keeps a hub in Charleston and serves North Charleston, Hanahan, Goose Creek, Summerville and Mount Pleasant, and works across South Carolina, alongside hubs in Atlanta, Charlotte and Richmond. Share your site address and scope, and we confirm how we support it.

Atlanta, GACharleston, SCCharlotte, NCRichmond, VA

Also see: Factory and warehouse automationControls integrator CharlestonIndustrial controls, PLC and SCADAIndustrial electrical contractors CharlestonCharleston, SC electricians

Questions

Imagine Every Question Answered Before You Call

Each answer below comes from how ELEKproTEK works today.

What does an industrial automation company do?

An industrial automation company plans, installs and supports the systems that move product and run machines: conveyors, sortation, controls, drives, sensors and the power behind them.

Our crews cover the electrical, controls and commissioning side, so your equipment connects cleanly to your building.

Do you work on warehouse automation systems in Charleston?

Yes. We provide power, controls and field wiring for conveyors, sortation and material handling in warehouses and distribution buildings.

Can you work alongside our equipment vendor?

Yes. We sequence the work with your vendor and your general contractor, wire and power the equipment, and support the start-up.

Do you handle PLC, HMI and SCADA integration?

Yes. We program and connect PLC, HMI and SCADA systems to your equipment, and the controls integrator page on this site goes deeper.

Can you support robotics and new equipment hookups?

Yes. We provide power and controls for robotics cells and for new, moved or reinstalled equipment at commercial and industrial sites.

How do you plan work around production?

We plan the sequence, staging and outage windows with your team before the first breaker opens, so the work follows the plan.

Do you serve plants outside Charleston?

We serve Charleston and the surrounding area from our hub, and we take South Carolina projects. Send the form with the site address and scope, and we confirm timing with you.

Who leads the work?

A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.

Who is the best industrial automation company in Charleston SC?

The best fit is a licensed team that plans carefully, works safely with your vendors, tests thoroughly and documents the finished work.

ELEKproTEK is built around that: a Master Electrician leads every scope, and you receive a written report and test records. Send the short form and compare for yourself.

What happens after I send the form?

You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.

Every step is spelled out, so you always know what comes next.

Does my appointment deposit count toward the project?

Yes. Every service appointment deposit credits toward your project total, and the booking page shows the details for the appointment you choose.

The short form and the phone number sit right below the last answer.

Your first step · about 60 seconds

Your Charleston Automation, Led by a Master Electrician

A Master Electrician reviews your request, and you choose the appointment that suits you.

Call 888-586-5554

We Keep Your World Powered. Call 888-586-5554, or Save your appointment.

P.S. Attach your layout or a vendor drawing, and choose your time next.