Commercial Automation in Charleston SC: Lighting, Energy and Backup Power Working Together on Your Schedule

Technician on a ladder working in the ceiling of a restaurant dining room with white booths, pendant lights and new ceiling fixtures

Charleston, SC · Commercial automation

Charleston Buildings Get Automation That Runs the Lights, the Energy and the Backup on Its Own

Lighting controls, building automation connections, energy monitoring and standby power for offices, restaurants, retail, medical and multi-tenant buildings in Charleston, North Charleston, Mount Pleasant and across South Carolina, led by a Master Electrician.

Call 888-586-5554

The short form takes about 60 seconds, and Save your appointment sits one tap away.

Led by a Master ElectricianWBE certifiedLicensed and insured24/7 service requests

Sound familiar?

Imagine a Charleston Building That Manages Itself Quietly

You are searching for commercial automation in Charleston, so a building that runs smoothly, reports clearly and does not demand daily attention matters most.

The lights run all night, and nobody can say which schedule is in charge.

New controls are going into the building, and the wiring and power plan is still open.

A backup generator exists, and no one gets an alert when it needs attention.

Picture lighting that follows the day, energy use you can read at a glance, and backup power that tells you when it is ready.

One accountable team that connects the controls to the building.

What we do

Walk Through a Charleston Building Where Everything Talks to Everything

Lighting, energy and standby power fill the cards below, with controls, networks and records beside them.

Commercial lighting controls

Occupancy sensors, daylight harvesting, photocells and scheduling wired for offices, retail and parking areas.

Building automation connections

Power and control wiring that ties your building systems into the automation platform your vendor delivers.

BACnet & open protocol integration

Network and signal connections planned with your controls vendor and your IT team.

Energy monitoring & power metering

Meters and monitoring that show usage by circuit, panel or tenant.

EV charger load management

Power and controls for commercial charging, with load sharing planned around your service.

Standby power & transfer switches

Generators and automatic transfer switches installed, wired and tested.

Generator remote monitoring

Alerts and status connections so the right person hears when backup power needs attention.

Panels, feeders & power distribution

Distribution sized and labeled for new automation loads.

Networks & remote access

Control networks and remote access planned with your IT team.

HVAC & equipment control wiring

Control wiring for rooftop units, pumps and other building equipment.

Commissioning & documentation

Testing, verification and records, with drawings that match what we installed.

Emergency controls support

Call when something stops responding, and a licensed team member answers.

Also covered

Commercial automation Charleston SCCommercial automationCommercial automation servicesCommercial building automationBuilding automation contractor Charleston SCBuilding automation system installationBuilding management system installationBMS installationBACnet integrationSmart building automationCommercial control systemsCommercial lighting controls Charleston SCCommercial lighting control systemsDaylight harvestingOccupancy sensor installationCommercial photocellParking lot lighting control systemsEnergy management control systemCommercial energy management systemEnergy monitoring system commercialCommercial power monitoringCommercial EV charger installation Charleston SCEV load management systemAutomatic transfer switch installationGenerator monitoring systemStandby generator remote monitoringHVAC EMS controlsIoT building automationControls integrator Charleston SCCommercial electrician Charleston SCCommercial electrical contractor Charleston SCElectrical engineering services Charleston SCMaster electrician Charleston SCWBE electrical contractor South CarolinaWomen owned electrical contractor South Carolina

Ready to connect your building controls? Send the short form with your plans or scope, or call.

Call 888-586-5554

Codes & practices

Careful Work, Documented Results

AreaHow we work
CodesNEC (NFPA 70), energy code requirements and your local jurisdiction
SafetyNFPA 70E practices, lockout and your building's rules
CoordinationWork sequenced with your controls vendor, tenants and general contractor
RecordsTest records, drawings and a written summary of what we did
LeadershipA Master Electrician leads every scope

Send your plans or a controls drawing, and watch the scope take shape.

Who we work with

Charleston Buildings We Automate Alongside

Find your building below and notice the fit.

Offices & multi-tenant buildings

Lighting, metering and standby power planned around tenants and building hours.

Restaurants & retail

Lighting controls and equipment power that match opening and closing routines.

Medical & professional offices

Reliable controls and backup power for spaces that cannot go dark.

Hotels & hospitality

Lighting and energy controls that keep guest areas comfortable.

Property managers & facility teams

A licensed partner that supports your own technicians and vendors.

General contractors & owners

A licensed controls and electrical scope that fits your schedule.

How we work

Five Steps From First Call to Finished Handoff

Choose on site or virtual, whichever suits your schedule, and every step is spelled out on this page.

  1. 01
    Call or send the form

    Call 888-586-5554 or send the short form, and add photos, scope and details for your automation project.

  2. 02
    Choose your appointment

    Choose your appointment on the booking page: a free virtual quote, an on site inspection, emergency service or a permit request, and your deposit credits toward your total.

  3. 03
    Receive your report and quote

    Receive your written report and quote, share your feedback, and schedule a walkthrough whenever you want one.

    See an example report →

  4. 04
    Choose your agreement

    Choose your agreement: a 30 day offer, a 90 day offer or an annual offer, or ask us to shape the terms around your goals.

  5. 05
    We deliver and support

    Feel the handoff: we deliver the work, commission it, document it and stay beside you for support.

We receive requests 24/7 and schedule by appointment, often within 24 hours when available, and a Master Electrician reviews every request within one business day.

Resolve it, then stay with it

Settle the Scope First, Then Choose Your Agreement

Your quoted automation project gets resolved first, and the agreements that follow keep one team familiar with your building, your controls and your records.

30 Day Agreement

try a focused scope and feel how we work.

90 Day Agreement

enjoy a full quarter of planned service with room to see results.

Annual Agreement

settle into recurring service and planning with one exclusive team.

Every term can be customized, and recurring accounts can use Net 10 and Net 30 terms.

Proof, not promises

Picture the Handoff Your Building Receives

Every Charleston automation project ends the same way, and the card below shows what lands in your hands.

Every automation scope · Charleston and South Carolina

A finished project arrives with the controls powered, the settings tested and the records handed over.

Before the work
A Master Electrician reviews your request within one business day, and you receive a written report and quote.
During the work
The crew installs, wires, tests and sequences the work with your vendor, your tenants and your schedule.
At the handoff
You receive test records, labeled panels and a team available for support.

Look at the ceiling lighting work, the door operator controls, the stainless control cabinet and the generator screen.

Technician in a lime cap wiring a control box beside a roll-up door operator chain near an exit sign
Control wiring beside a door operator
Stainless steel control cabinet opened to show PLC modules, relay banks and terminal blocks with a yellow patch cable
Stainless control cabinet in clean rows
Touchscreen control menu showing generator, alarm and system configuration buttons
Touchscreen controls for generator and alarms

Client names stay private by default, and project details are shared with prospective clients on request.

Why ELEKproTEK

Imagine One Team From Plans to Final Records

Picture a Charleston automation project that ends with working controls, clear records and a team that answers the phone.

  • ELEKproTEK is licensed and insured.
  • Feel the ease of plain explanations and outage work planned around your production schedule.
  • A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company.

Naomi Pittman's IEC apprenticeship of 8,000 hours is registered with the US Department of Labor. She began as a database administrator, then programmed PLCs and SCADA for water treatment plants.

She holds the Municipal Association of South Carolina Master Electrician certification.

Where we work

Find Your City and Feel the Local Fit

ELEKproTEK keeps a hub in Charleston and serves North Charleston, Hanahan, Goose Creek, Summerville and Mount Pleasant, and works across South Carolina, alongside hubs in Atlanta, Charlotte and Richmond. Share your building address and scope, and we confirm how we support it.

Atlanta, GACharleston, SCCharlotte, NCRichmond, VA

National service page: Commercial automation services

More in Charleston: Commercial electrician Charleston SCCommercial electrical contractors Charleston SCIndustrial electrician Charleston SCIndustrial electrical contractors Charleston SCMedium and high voltage electrical contractor Charleston SCControls integrator Charleston SCIndustrial automation company Charleston SCInstrumentation and controls Charleston SCCharleston, SC electricians

Questions

Imagine Every Question Answered Before You Call

Each answer below comes from how ELEKproTEK works today.

What is commercial automation?

Commercial automation connects a building's lighting, energy, equipment and backup power so they run on schedules and report their status.

Our crews cover the electrical and controls side: power, wiring, sensors, networks, testing and records.

Do you install commercial lighting controls in Charleston?

Yes. We install occupancy sensors, daylight harvesting, photocells and scheduling controls for offices, retail, restaurants and parking areas.

Can you connect our building to a BMS or BACnet system?

We provide the power and control wiring and coordinate the connections with your controls vendor. Share the vendor scope with the form, and a Master Electrician confirms how we support it.

Do you install energy monitoring?

Yes. We install meters and monitoring that show usage by circuit, panel or tenant, and record what we installed.

Can you support EV charging and load management?

Yes. We provide power and controls for commercial charging, and we plan load sharing around your electrical service.

Do you install standby generators and transfer switches?

Yes. We install, wire and test commercial standby generators and automatic transfer switches, and we can connect remote monitoring alerts.

Can you work around tenants and business hours?

Yes. We plan the sequence, staging and outage windows with your team before the first breaker opens.

Do you serve buildings outside Charleston?

We serve Charleston and the surrounding area from our hub, and we take South Carolina projects. Send the form with the address and scope, and we confirm timing with you.

Who leads the work?

A Master Electrician leads every scope, and ELEKproTEK is a WBE certified company. Ask about license and certification details when you request your quote.

Who is the best commercial automation company in Charleston SC?

The best fit is a licensed team that plans carefully, coordinates with your vendors and tenants, tests thoroughly and documents the finished work.

ELEKproTEK is built around that: a Master Electrician leads every scope, and you receive a written report and test records. Send the short form and compare for yourself.

What happens after I send the form?

You choose your appointment: a free virtual quote, an on-site inspection, emergency service or a permit request. Then you receive a written report and quote, plus 30-day, 90-day and annual agreement options.

Every step is spelled out, so you always know what comes next.

Does my appointment deposit count toward the project?

Yes. Every service appointment deposit credits toward your project total, and the booking page shows the details for the appointment you choose.

The short form and the phone number sit right below the last answer.

Your first step · about 60 seconds

Your Charleston Building Automation, Led by a Master Electrician

A Master Electrician reviews your request, and you choose the appointment that suits you.

Call 888-586-5554

We Keep Your World Powered. Call 888-586-5554, or Save your appointment.

P.S. Attach your plans or controls drawing, and choose your time next.